Why is there an aquastop in a washing machine?

Aquastop hose Washing machines are constantly being improved, and manufacturers are constantly adding new features, causing their prices to rise. Many users believe that most of these innovations, such as the AquaStop feature in washing machines, are practically useless and merely serve as an excuse for yet another price hike. Let's find out if this is actually true, or if AquaStop does have some advantages.

Purpose of Aquastop

The simple and easy-to-remember word "Aquastop" refers to a complex leak protection system built into the washing machine's body (both on the tray and on the inlet hose). If any component inside the washing machine begins to leak (e.g., the tank, hose, pump, detergent drawer, etc.), a sensor in the tray immediately shuts off the water. The sensor in the inlet hose is triggered if a rupture occurs inside the hose itself, and the water is immediately shut off.

In fact, the importance and usefulness of the Aquastop feature shouldn't be underestimated. After all, it's not uncommon for people to flood their neighbors' apartments, forcing them not only to replace their own floors but also to carry out a complete renovation for complete strangers. Still, the option of paying a little more for a machine with a leak-proof system and leaving the washing machine unattended, without worrying about a flood, seems more appealing.

What types of security systems are there?

As mentioned above, most water protection mechanisms are located inside the tank, but this is still a generalization. Some protection systems are located outside the tank. Leak protection can take a wide variety of forms.

Semi-automatic mechanism.
Float with relay.
Water Block System.
Electromagnetic tap.
A set of protective mechanisms with indication.

Read about each option separately and decide which is best for you and whether you need an aquastop at all. The type of protection you ultimately choose depends on many factors, including the specific features of the machine itself, the condition of the local waterway, and your personal preferences.

Let's at least protect the hose

Of course, if the machine wasn't originally equipped with the Aquastop system, installing the sensor into the tray yourself is practically impossible, but you can easily secure the inlet hose yourself.

Important! A burst hose is the cause of washing machine-related flooding in over 75% of cases.

The algorithm of actions is as follows:

disconnect the unit from communications;
Disconnect the inlet hose. You may need to replace the O-rings and thoroughly clean the coarse filters at the same time;
install the sensor on the water supply tap, turning the device clockwise;
Connect the inlet hose to the aquastop.