Error F06 on an Indesit washing machine

All modern Indesit washing machines are equipped with a self-diagnostic system. This feature allows the machine to detect any malfunction and promptly notify the user. Machines with a display will display the error code on the control panel. If the washing machine doesn't have a display, it will alert you to the problem by flashing the indicator lights. Let's look at how to recognize the F06 error on an Indesit washing machine and what malfunction it indicates.

Code identification

Is it possible to fix the problem and restore the washing machine's functionality on your own? To solve the problem, you need to understand what the error message means. The F06 code indicates a problem with the washing machine controls, as a result of which the machine does not respond to commands given by the user or does not start washing. That is, the washing machine simply does not respond to pressing buttons and does not start the selected mode.

An Indesit washing machine without a display will indicate an error by flashing lights. The "Extra Rinse" and "Soak" lights will be on. The "Quick Wash" and "Super Wash" lights may also be on. The "Ironing" and "Dirty Laundry" lights may also be on. A careful user may also notice the "Lock" light flashing.

What should you do if you encounter this problem? How can you restore your Indesit washing machine to working order? Whether you can fix the problem yourself, or will you need to call a technician, we'll discuss below.

Refuses to turn on

How can I fix the situation if my attempts to turn on my washing machine are unsuccessful? What if the washing machine simply refuses to start?

First, check to see if there's power in the apartment; perhaps there's a power outage. Check to see if any circuit breakers have tripped. You can also use a multimeter to check the condition of the outlet and power cord. If a visual inspection of the power cord reveals any defects, it needs to be replaced.

If the washing machine is connected to the power supply via an extension cord, it's worth inspecting it for damage as well. Next, check the buttons on the control panel for proper operation. If all else fails, you'll need to inspect the washing machine's main control module. If there are clearly visible defects or loose connections on the circuit board, you should call a professional.

Repairing the washing machine's "brain" without the right knowledge and experience is impossible; you could end up damaging the part, which would increase the cost of repairs.

The technician will diagnose the control module, replace the triac if necessary, solder the tracks, etc.

The lights are flashing erratically

In some cases, a simple reboot of the washing machine can resolve the F06 error. Unplug the washing machine for about 20 minutes. If this doesn't help and the error persists, it's best to check the wiring. In certain Indesit models, the wires run close to internal components. This close proximity can lead to damage. You can check the wiring with a tester, and if it's damaged, replace it yourself.

It's also worth checking the capacitors on the washing machine's control board. Sometimes, this behavior is caused by burnt-out capacitors, specifically 10v680uf, 10v1000uf, and 10v470uf. Diagnosing the components and replacing them will help fix the problem.

Unable to start washing

Sometimes the F06 error code appears after the wash cycle has already started. What should you do in this case? First, check that the drum door is closed tightly. If the door is not completely closed, the safety system will not allow water to enter the drum and will pause the wash cycle, displaying an error. F06. It may be necessary to replace the door lock to fix the problem.

Diagnosis and replacement of the locking device is quite simple:

• de-energize the washing machine;
• loosen and remove the metal clamp securing the hatch cuff;
• insert the sealing rubber into the drum;
• unscrew a couple of bolts holding the UBL;
• put your hand into the hatch behind the body and remove the lock;
• disconnect the power supply wiring of the UBL;

Before disconnecting the contacts, take a photo of the wiring diagram!

• Check the functionality of the device with a multimeter.

The tester is switched to resistance measurement mode. The device's probes are applied to the neutral and live contacts. If the multimeter screen displays a three-digit number, the lock is intact. Next, the probes are applied to the neutral and common contacts. If the device shows a one or zero, everything is OK. A faulty door lock must be replaced; repair is not possible.

The F06 code likely appears because the machine can't fill with water, leaving nothing to wash with. In that case, make sure the water isn't shut off or the shutoff valve isn't turned off. In most cases, you can fix the error yourself if you pay close attention to the symptoms.

   

Readers' comments