Where are the shipping bolts on a Candy washing machine?

Most users assume that after purchasing a Candy washing machine, the only task they face is installing it and connecting it to all the utilities. However, this isn't entirely true. In fact, the shipping bolts, which need to be removed, are just as important. But not everyone knows what they are and where to look for them. Let's take a closer look.

Let's start looking for these fasteners.

The Candy washing machine's shipping bolts are located in the same location as all other washing machines. Finding them is easy. Just check the load capacity of your machine.

• for front loading, the bolts are located near the rear cover;
• for vertical loading - near the top panel, or near the same rear cover.

If you are not sure about your actions, it is better to refer to the instructions!

Typically, it contains not only information on where to find the aforementioned bolts but also instructions on how to remove them. If you don't have the instructions handy, don't despair. You can easily find the shipping bolts yourself.

You just need to carefully inspect the back panel of the washing machine, as the bolts are often located along the edges of the back panel. Moreover, the position of these fasteners is the same on all front-loading washing machines, so if you've removed them before, the procedure will be very easy to repeat.

Purpose of screws

Transporting a Candy washing machine, unlike other household appliances, is much more challenging. While a standard box with protective paper and cushioning materials is sufficient for household electronics, washing machines are a different matter. Their design prevents mishandling, as the drum and tub are constantly suspended and only loosely attached to other components. This arrangement eliminates vibration during washing, but makes the machine extremely vulnerable during transport.

When transporting your "home helper" over bumpy roads, any stone or bump can cause a strong jolt, which can be detrimental to the machine, as the drum will slam against the frame, damaging itself and other internal components. This is where transport bolts come in handy. They keep the drum stationary, which, in turn, eliminates the risk of damage during transport.

The bolts are standard in design. They resemble a long screw with a spiral shaft, and at the end is a polymer bushing separated from the metal shaft by a rubber layer. This washing machine has only four bolts.

What happens if you leave the bolts?

Washing machine manufacturers strongly recommend removing the bolts before washing. After all, when starting, the motor accelerates and attempts to rotate the drum. However, if the drum remains immobilized, this force can cause damage. This damage can affect not only the drum, but also the shock absorber system, the shaft, and other components that are dangerously close to the drum. Prolonged operation of the machine in this condition will cause significant harm.

With washing machines becoming increasingly popular, there's a growing belief among the population that everyone knows how to operate them properly. For this same reason, people often ignore the instructions and don't even realize the importance of removing the shipping bolts, so they often run a wash cycle with them in place. In this case, the washing machine will indicate a problem in the following ways:

• a high level of vibration will occur;
• the machine will start to make sharp jumps, which will be stronger than when spinning at high speeds;
• strange, uncharacteristic sounds will appear.

If the machine is working but you remember the screws, immediately press the "Stop" button and unplug the power cord. After these steps, it's a good idea to call a technician to assess the extent of the damage. It is extremely important to note that unremoved bolts are not covered by the warranty, meaning that if the damage is serious, you will have to pay for repairs out of your own pocket.

However, you might be lucky and get off with only minor injuries. However, if the machine has been in use for a long time, you'll have to prepare for equally lengthy repairs or even disposal. That's why it's crucial to remove the shipping bolts first and only then operate the Candy washing machine.

   

Readers' comments