Brandt washing machine errors

Washing machines from the French manufacturer are gaining popularity in the Russian home appliance market. Customers are increasingly choosing reliable and functional Brandt machines. These French washing machines are equipped with a self-diagnostic system for detecting any problems. This feature helps quickly identify which component is faulty. We'll look at the main errors found in Brandt washing machines and explain their meanings.

Problems with water drainage and intake

First, let's look at error codes related to water intake and wastewater drainage. This type of malfunction is the most common, so we recommend memorizing the basic error codes.

1. This indicates that the washing machine's tank is not filling with water. This could be due to a lack of water in the water supply, a clogged or kinked inlet hose, or a faulty level sensor. Check all possible causes and correct any defects found.
2. This alerts you that the water in your washing machine is draining very slowly, or perhaps not at all. If this symbol appears on the screen, you should inspect the drain hose for blockages and kinks. Then, you'll need to check the pump and drain filter.
3. It indicates there's more water in the washing machine's tank than necessary. This error can occur due to a faulty pressure switch. It is necessary to check the functionality of the water level sensor. If everything is OK with it, then the main electronic module needs to be diagnosed.

Once you've identified the error code, it's easy to repair the washing machine yourself and restore its functionality. Typically, drain and fill system problems can be resolved at home.

Incorrect water heating

Error codes of this kind are displayed on the display due to a faulty heating element or thermostat. Very rarely, the main control module is the cause of the errors.

• This indicates that the water isn't heating. To repair the washing machine, you'll need to disassemble its housing, remove the heating element, and check it with a multimeter. A control board diagnostic would also be helpful.
• The temperature sensor is faulty. What should you do if this type of malfunction is detected? You'll need to find the thermostat. It's located on the heating element. Check its functionality with a multimeter and replace the sensor if necessary.

To fix problems with the heating element or thermostat, you'll need not only some knowledge of the washing machine's internal structure, but also a special tester.

Problems with the hatch

If the hatch door isn't locked as required by the intelligent system, the system won't fill the tank with water. If this malfunction occurs, the washing machine will display the following messages:

• The door won't lock. This can be corrected by pressing the door more firmly. If this doesn't help, the door locking mechanism is faulty and needs to be replaced.
• ER12, ЭР12. Displayed on the display if the door is open. Close the washer and restart the selected wash program.

If these errors occur, it's easy to repair them yourself. In some cases, pushing the hatch door harder to close it can help resolve the issue.

Engine problems

Brandt washing machines are equipped with commutator motors, so the brush, fins, and motor winding often fail. The following error codes can help diagnose the problem.

1. This indicates motor damage. The electric motor needs to be diagnosed, or, in rare cases, the triac on the control board needs to be replaced.
2. The engine stops working. The technician will help determine whether the part needs repair or complete replacement.

Most Brandt washing machine problems can be repaired independently. However, for more serious issues, it's best to contact a professional.

   

Readers' comments