Electrolux top-loading washing machine breakdowns

No household appliance is 100% immune to defects and breakdowns that arise during active use. Therefore, before purchasing, it's important to consider not only the advantages of a particular appliance but also the most common problems that may arise. Knowing all the common problems with Electrolux top-loading washing machines in advance can help you either prevent them or quickly fix them. Let's take a closer look at the common problems associated with this brand's washing machines, as well as how to repair them.

Not a single light on the panel is lit.

Housewives may find themselves in an unpleasant situation when all the laundry is already loaded into the drum, the detergent has been added to the powder compartment, but the machine cannot be turned on. At the same time, the CM display also does not work, as do all the buttons on the dashboard. In this case, you first need to carefully examine a number of elements.

• The outlet. It could be damaged, or there might simply be no power in the house, causing the appliances to not respond. This can be easily checked: use a test screwdriver or try plugging another appliance into the outlet.
• Cord and plug. You may also need to repair the cord and plug, which could also be damaged. Check the components for signs of burning or deformation. If this is the case, do not attempt to repair the component; simply replace it with a new one to avoid potential fire hazards due to the cord's additional insulation.

Experts do not recommend connecting energy-intensive appliances such as washing machines to an extension cord, as this also increases the risk of fire and other malfunctions.

• Surge protector. The appliance's surge protector or its contacts could also be damaged. This component is located behind the wall, and if it's damaged, you'll notice scorch marks or a bulging casing. In this case, simply buy a new surge protector to replace the damaged one.
• Control panel. If moisture or household chemicals get into the control panel, it may oxidize, causing the keys to stick. To fix this, you'll need to remove the top panel of the washing machine and replace the damaged keys.

You can handle any of these problems yourself, so don't rush to call a repair service.

The powder remains in the tray

The longer you use your Electrolux washing machine, the worse the washing results become. Stains may remain on clothes even after long, highly efficient cycles. This often happens not because of wear and tear on the equipment, but because the washing powder was not used during the wash cycle and simply remained in the powder compartment. In this situation, the machine tries to clean dirty clothes with only clean water without household chemicals.

The washing machine is designed so that water enters the detergent dispenser, mixes with powder or gel, and then flows into the drum. Because the liquid enters the detergent drawer through a separate valve, if the valve becomes clogged, the water may simply not reach the detergent.

To fix the problem, you first need to diagnose it. To do this, simply make sure there's actually detergent left in the detergent drawer after the cycle is complete. If it doesn't drain during the wash cycle, follow the instructions.

• Remove the detergent drawer from the unit.
• Check the inlet valve carefully.
• If there is a blockage, clean it thoroughly or replace the worn valve with a new one.

As you can see, even this problem doesn't require complex repairs; it can be resolved in just 10-15 minutes.

The drum is stuck with the hatch open.

Another common problem is an upside-down drum. To fix this, the user must turn the drum upside down. This occurs after the doors are opened at the end of a wash cycle or when they scroll down when the cycle is paused. This can occur due to a faulty locking mechanism or incomplete closure of the doors. Regardless of the cause, if the machine is not repaired, it will be impossible to remove clothes.

Restoring your appliance's functionality on your own is very difficult, so many people turn to a repair service. To save money, you can use our guide, created specifically to combat this problem. What should you do?

• Take a long steel wire with a cross-section of 0.3-0.6 millimeters.
• Bend one end of the wire to create a hook.
• Lower it with the hook down.
• Hook the sash and close the hatch.
• Close the doors and rotate the drum with the hatch facing up.

The most difficult part of this repair is the need to work blind. If the opening in your Electrolux "home helper" is too small to accommodate the hook, you'll need to carefully widen the opening or make the hook smaller. If you still can't fix the washing machine, you'll either have to call a service center or partially disassemble the appliance to access the doors and close the drum.

Pay attention to the control board

Finally, the washing machine's control board often needs repair. This can be determined by periodic failures during operation and resetting the activated program. The problem may also manifest itself in the form of sticking buttons on the control panel.

Do not attempt to repair the control module yourself, as this requires special tools along with up-to-date software, plus the risk of accidentally damaging the component is too great.

Since the failure of the "brain" of the entire system can occur in a variety of ways, the component is difficult to inspect and repair. Most often, the problem can be fixed by updating the firmware or replacing burnt-out capacitors and resistors. Furthermore, the problem may lie in damaged terminals, contacts, and tracks.

To minimize the risk of board failure, you should protect your "home assistant" from power surges. A simple voltage stabilizer can help prevent damage to expensive household appliances.

   

Readers' comments