The lock works a few times and that's it (AristonARSL85)

Question for the master: My Ariston ARSL85 washing machine keeps locking the door several times, but that's it. The start button and lock indicator light keep flashing.

Our expert, a representative of the Samrem company, answers:

Error F-01 — engine + control circuits, pump + control circuits, abnormal state of the level sensor. However, this error has 16 more subcodes, which can only be identified with specialized equipment. In your case, inspect the brushes on the engine, and if they are normal (extension greater than 15 mm, no burns), inspect the module (if you have some knowledge of electronics). Or, contact a mechanic.

2 reader comments

1. March 19, 2016 at 4:27 PM

   Konstantin:

   Hello. I have a Daewoo Nano Silver AG+. In any mode, it fills with water, then the relay clicks periodically. The drum is stuck in place, the brushes on the motor are new, and when two contacts are closed, the relay starts hissing. The heating element stops when it opens, and after a while, the water starts draining. I also blew into the water sensor tube and the valve itself. I checked all the pins on the module and nothing was loosened by hand. The drum spins easily, and there are no extraneous noises. The machine is about 10 years old.

   Answer
2. August 12, 2023 at 11:34 PM

   Valera:

   The locking device clicks three times on the terminal. 230 on all three.

   Answer