How to clean mold from the detergent drawer in a washing machine?

Mold can grow on virtually any surface. Once spores enter a washing machine, they multiply very quickly. Black spots can often be found on the door seal or the walls of the detergent dispenser. Let's figure out how to clean the detergent drawer to prevent mold from spreading further.

Remove the tray

The detergent drawer compartment is often attacked by mold. The explanation is simple: detergent particles stick to the walls of the drawer, water droplets remain there, and the humid, warm environment is favorable for mold growth. If you don't wash and dry the container, spores will definitely settle in it after several months of using the machine.

To clean the washing machine's drawer, you need to remove it from the housing. This isn't difficult, but the first time you try it, you might encounter some difficulties. The procedure is simple:

• pull the dispenser towards you until it stops;
• With your free hand, press down on the plastic tab located above the conditioner section;
• Remove the tray from the washing machine body.

Putting the powder drawer back in place is even easier. No need to touch the tab; simply insert the drawer into the "hopper" strictly along the guides and press the tray in.

By removing the detergent drawer from the washing machine, it will be easy to clean its most hard-to-reach places.

Once you have the dispenser in your hands, inspect it for any deposits or mold. Assess the container's level of contamination and begin cleaning.

What and how to clean?

If mold has already taken hold in the detergent drawer, immediate action is needed to eradicate it. Products that effectively combat mold spores are now available in stores. Here's a brief overview of effective "chemicals."

• HG Mold Removal Spray. A versatile product that removes mold spores from plastic, tiles, walls, and wood. Simply take the spray bottle, spray the affected area, and wait for the mold to dissolve. Then, rinse the surface with water and wipe dry.
• BON is an effective solution against mold and limescale. Spray the affected area and leave for 20-25 minutes. Then, brush the litter box, rinse with water, and dry.
• GraSS Bimold is a mold-fighting liquid. This concentrated, universal antibacterial product is diluted with water at a 1:1 ratio before use. Spray the mold-affected surface with a spray bottle. After 10-15 minutes, brush the area and wipe it with a damp cloth.
• Unicum spray quickly combats mold and unpleasant odors. It can be used on a variety of surfaces, including plastic. Spray the detergent drawer, wait 5 minutes, then wipe the drawer with a brush and rinse with warm water.
• Bagi Anti-Mold is another versatile and effective product. It contains chlorine. Spray the walls of the powder drawer, wait 20-30 seconds, and wipe the surface with a damp sponge. Then, be sure to rinse the drawer thoroughly with clean water.
• Cillit Bang Black Mold is suitable for cleaning washing machine dispensers. Spray the product on the affected area and let it sit for 15 minutes. Then, brush the dispenser walls and rinse with water.

When cleaning the powder dispenser with household chemicals, it is better to wear rubber gloves and a respirator.

The products described are universal and suitable for cleaning mold from powder dispensers. When using any product, it's important to follow the instructions on the product packaging.

Prevent mold from forming

It is better not to allow mold to settle in the powder compartment. It is important to take care of your machine in a timely manner to prevent mold from growing on its parts.When using a washing machine, you need to follow a few simple tips:

• After each wash, remove the tray from the housing, rinse it under running water, and wipe it dry with a napkin;
• After completing the "hygiene procedures," do not insert the drawer all the way into the machine; leave the compartment half open for ventilation. Mold grows quickly in a humid environment, but spores do not multiply in a dry one.
• Every 10-15 washes, thoroughly clean the dispenser using a brush and special cleaning agents.

Regular maintenance will prevent mold from growing on your washing machine's components. By following simple recommendations, you can extend the life of your equipment. Your automatic washing machine will thank you for your efforts and provide trouble-free operation for a long time.

   

Readers' comments