CE error on LG washing machine

You should be wary if your LG washing machine displays the CE error immediately after starting it. At best, this is a one-time system failure that can be resolved by simply rebooting the machine. If this doesn't help, the cause of the malfunction is more serious and needs to be investigated as soon as possible.

Urgent actions

What should you do if the CE code appears on the display? This error doesn't always indicate a serious problem. Before you start troubleshooting the system, try a couple of simple steps.

The first thing you should do is sniff the machine's body. If you smell melting wires, you can assume the problem is caused by an overloaded electric motor. If the permissible load weight of laundry in the drum is significantly exceeded, an overload occurs, as a result of which the protection is activated and the motor switches off. If the machine displays the code during the main wash or spin cycle, pause the machine and remove some items from the drum. After 10 minutes, try restarting the cleaning cycle.

Reset the washing machine. Sometimes the error occurs due to a power surge, which causes the main control board to fail. The solution may be straightforward: unplug the machine for 15 minutes and then plug it back in. If the electronic module was the cause, the CE error will be reset.

Turning the washing machine off/on using the power button will not be considered a restart; it is essential to completely de-energize the equipment by unplugging the power cord from the outlet.

If simple solutions fail, a more detailed diagnosis is needed. Depending on the type of damage, the complexity of the work to be done and the method of repair—whether you'll need to do it yourself or hire a professional—will be determined.

What causes this error?

In fact, the CE error code can indicate a malfunction of completely different parts of the washing machine. To repair the washing machine, it is necessary to carefully examine the symptoms and identify the cause.

If the washing machine displays a CE error during the main wash or spin cycle, accompanied by grinding and grinding sounds, the problem is most likely with the bearings or seal. Repairs will involve disassembling the washing machine body, removing the damaged parts, and replacing them completely.

A faulty Hall sensor, which monitors the motor's RPM, will also cause the drum to vibrate in LG direct-drive models. The washing machine may display an error at any stage of operation. You'll need to diagnose the tachogenerator with a multimeter and, if necessary, install a new sensor.

When carrying out repairs yourself, strictly observe safety precautions and only work with a completely de-energized washing machine.

You should also inspect the wiring connecting the control module and the motor. The solution may involve replacing a burnt-out cable or tightening the connection. If the wiring is defective, the machine may display a code at any stage of the wash cycle. Another telltale sign is a burning smell coming from the front panel of the housing. To repair the controller, you need to clean or solder the tracks located on it. control board, or replace the unit completely.

Another possible cause of the CE error is a faulty electric motor stator. This will require motor diagnostics and likely stator replacement. The code is also displayed if foreign objects get caught between the washing machine's tank and drum.

   

Readers' comments