Error F15 in the Atlant washing machine

Error F15 is quite specific and often manifests itself in such a way that the user is left with no doubt about its cause. Sure, if you walk into the bathroom or kitchen and see a huge puddle forming under your Atlant washing machine, and the display shows F15, you'll probably already know there's a leak. However, there can also be hidden causes for this error code, not to mention the need to quickly and professionally determine the source of the leak. Overall, there are many questions about this error, but few answers, so we decided to try to remedy the situation in this article.

Description and reasons for appearance

The Atlant automatic washing machine, like any other, is designed to make life as easy as possible for housewives. Washing, and sometimes even drying, clothes is completely automatic, and naturally, no one monitors this process. We only approach the washing machine to load the laundry, add detergent, and start the wash cycle, and then remove the washed and spun clothes.

What happens during the hour and a half it's running doesn't concern us, and perhaps we shouldn't. Hundreds of users have encountered the F15 error, resulting in flooding in their apartments and those of their downstairs neighbors. If the washing program hadn't stopped in time, the entire building would have flooded.

Try not to leave your washing machine unattended for long periods of time. When leaving home with the washing machine running or going to bed, remember that the appliance could easily malfunction.

So, what's the F15 error code for an Atlant washing machine? How do you decipher it, and what causes it? Let's start with the explanation. The F15 error code indicates a leak in the washing machine or an electronic malfunction. How does the washing machine detect this? Very simply, thanks to a sensor located in the drain pan. Theoretically, if the sensor is triggered in a timely manner, the user won't even notice that the Atlant machine has a leak. But this isn't always the case. In about half the cases, the sensor is delayed or doesn't trigger at all.

To understand the cause of a leak, it needs to be detected. Where might an Atlant machine leak, and what parts could be the weak point that causes the F15 error?

1. Filling valve and its connections.
2. Powder receiver and its pipes.
3. Washing tank.
4. Drain pipe.
5. Drain pump.

Leaks can also occur due to damage to the inlet and drain hoses. However, the machine will only detect such leaks if it is equipped with hoses with the Aqua Stop system. Otherwise, the self-diagnosis system will not respond.

Checking the filling and drain system

Before we start looking for the cause of the leak, let's play a little Sherlock Holmes. Inspect and feel the puddle that leaked from the Atlant car. If the water is absolutely clean, without any powder admixture, then the leak occurred at the inlet and either the inlet valve or its pipes are to blame. If the water is soapy, it means the leak has occurred in the other places we discussed in the previous point.

You can check for a leaking valve by unscrewing the top cover of the machine. Beforehand, disconnect the appliance from all power sources. Once you have access to the inlet valve, inspect it, paying particular attention to the hoses leading to the detergent drawer. The hoses may be loose or worn, so they should be replaced if necessary. The valve is generally not repairable and should be replaced if necessary.

If water containing detergent is leaking, start checking the hose from the detergent drawer to the tank, then the hose from the tank to the drain pump. If the hoses themselves are intact, replace the clamps; otherwise, replace the entire unit. The pump hose on the Atlant washing machine can be accessed through the bottom. Immediately inspect the pump as well; if a crack appears in the hose, water will begin leaking into the pan. In this case, the part needs to be replaced.

Troubleshooting other problems

Much less commonly, water leaks from the washing machine drum due to a torn seal, a cracked powder drawer, or a hole in the drum. The main sign of a faulty seal is water leaking through the machine door. Replacing this part is described in detail in the article. How to change the cuff in a washing machine.

As for the detergent drawer, it's not necessarily cracked or broken; it may be improperly inserted. As a result, some water ends up in the tray, while some leaks out. Try removing the tray and reinserting it.

Finally, a cracked tank is the most complex problem, requiring both time and money to fix. A leaky tank can be caused by:

• a sharp foreign object that has entered the drum;
• manufacturing defect;
• strong impact during transportation.

Please note: The washing machine's drum is detachable, making it easier to repair if possible.

A detailed description of how to remove the drum from a washing machine is available in the article Replacing bearings in an Atlant washing machineAfter removing the tank, carefully inspect the hole. If it's small, it can be sealed with solder. Otherwise, it's best to replace the tank with a new one. However, such a repair may be cost prohibitive, so decide for yourself what to do.

So, in most cases, you can fix the F15 error in your Atlant washing machine yourself at home or by calling a technician. It's rare that you have to take your car to a service center. Good luck!

   

4 reader comments

1. June 18, 2018 at 12:33 PM

   Senya:

   The machine has this error, there is no leak, but water does not fill.

   Answer
   • June 30, 2018 at 4:01 PM

     Vova:

     I also had the F15 error without any leaks. I dried out the hair dryer control module and everything worked again.

     Answer
2. August 7, 2021 at 10:54 PM

   Nata:

   There are no leaks, no water is being collected

   Answer
3. February 21, 2024 at 9:48 AM

   Igor:

   There are no leaks, no water is being collected.

   Answer