Error F17 on a Bosch washing machine

Thanks to the self-diagnostic system built into a modern washing machine, we can determine which part has failed, what's preventing the machine from operating normally, and how to fix the problem. All of this information is provided by error codes displayed on the machine's display. In this article, we'll discuss error code F17 in a Bosch washing machine.

Error f17: description and symptoms

If you turn on the machine and don't hear any water being drawn in for a certain amount of time, the display will show error F17. Experts interpret this error as water supply time exceeded.

This error can occur not only at the very beginning of the wash cycle, but also during it or before the rinse cycle. Some believe this error is indirectly related to the washing machine, but we wouldn't jump to such conclusions.

Error F17 in some models of BOSCH machines is indicated by code E17.

Reasons for the f17 error

Why isn't water getting into my washing machine? The reasons are as follows:

• the water supply valve is closed;
• water supply filters or pipes are clogged;
• there is no water pressure in the water supply system, that is, the water pressure is below 1 bar;
• The water pressure sensor is faulty.

Troubleshooting

What should you do if your washing machine displays error code E17? First, check if there's water in the house; it may have simply been turned off. Also, check if the water supply to the washing machine is open; perhaps you forgot to open it before starting the machine.

The next thing to check is the filters on the water supply, as they are used for coarse filtration. Here's what to do:

1. Turn off the power to the washing machine and close the water supply tap to the machine.
2. Prepare a container for water if there is water left in the hose assembly.
3. Unscrew the water supply hose from the water supply branch.
4. If there is a mesh at the end, rinse it with water and carefully remove any stuck debris.
5. Screw the end to the water pipe branch.
6. Now unscrew the other end of the hose that connects to the machine and rinse the filter in the hose in the same way, if there is one.
7. There may also be a mesh filter in the pipe coming out of the machine; it also needs to be washed and free of dirt.
8. We screw the hose into place.

Important! If there are instructions describing the location of the mesh filters, be sure to read them. You won't have to go through the hassle of searching for them.

If the E17 error on your Bosch washing machine is caused by low water pressure at the faucet, you won't be able to fix the problem yourself. In this case, you'll have to wait until the water pressure returns or call a plumber to determine the cause of the low water pressure.

If all the above steps have been taken and the car still displays error code F17, the next step is to check the solenoid valve and water pressure sensor. The valve's functionality can be verified using a voltmeter, measuring the voltage and resistance of the coil. In order to repair or replace the valve or sensor, it is necessary to remove the top cover of the washing machine. The entire process of replacing the sensor is described in detail in the article. Replacing the level sensor.

So, the E17 error in a Bosch washing machine can usually be resolved by cleaning all the inlet filters and pipes. However, if the internal components of the machine are damaged, professional assistance will be required.

4 reader comments

1. February 12, 2016 at 5:58 PM

   Sasha:

   My Bosch washing machine is showing E17 on the screen. What's the cause?

   Answer
2. January 6, 2017 at 10:39 AM

   Tatiana:

   My Bosch washing machine displays E23 on the screen. What's the reason?

   Answer
3. September 20, 2017 at 10:19 PM

   Mamzya:

   Thanks! You helped me figure it out. The dryer wasn't working, throwing error code F17. It turned out the dryer sensor was burned out. We replaced it, and it worked.

   Answer
4. April 14, 2018 at 12:04 AM

   Vitaly:

   What if I get error F16? What should I do?

   Answer