LE error in the washing machine

Error codes displayed on a washing machine's display serve to alert us to a malfunction or a potential breakdown. There are many error codes, but in this article, we'll discuss the LE error on a Samsung washing machine.

Description and causes of the LE error

The LE code, or LC on some models, appears on the screen when there's a water leak in the machine's tank. The water level drops sharply. When this error occurs, the machine stops operating to prevent the heating element from activating. If the heating element heats up without water, it will simply burn out.

There are many reasons for such spontaneous water leakage, we will list them:

• The heating element mount is broken.
• The air tube has become disconnected and water is leaking out during spinning.
• The water tank is damaged at the bolt connections.
• The detergent hose is not connected correctly.
• The drain hose is not connected and positioned correctly.
• Damage to the drain hose.
• The drain filter is not closed correctly.

The LE error on a washing machine most often appears before rinsing.

Troubleshooting

When the machine displays the LE error, you must immediately disconnect it from the power supply. First, press the power button on the machine's control panel, and then unplug it from the socket.

Now let's identify the problem. We can start by checking the drain hose. To prevent water leaks, it needs to be properly secured. One end of the drain hose is initially located inside the machine and secured at the bottom; it shouldn't be touched. The other end is directed upward and secured to the hook the manufacturer has already installed on the top of the machine. The remaining end of the hose is directed downward to the drain pipe branch of the sink.

The hose connection to the drain pipe must be well sealed and located at a height of at least 60 cm from the floor. How to change a washing machine drain hose, this question may arise if a crack appears in the drain hose, which leads to the LE error.

Important! It is not recommended to connect the drain hose to increase its length. An additional connection point may cause water leaks. Furthermore, pumping a hose that is too long will damage the drain pump more quickly.

It's easy to check the drain filter. Simply open the cover by turning it counterclockwise. Then close it again by turning it clockwise. The filter cover should fit tightly and cover the drain hole.

If an internal failure occurs, such as a disconnected heating element or a crack in the tank, you'll need the help of a professional. They'll select the right parts and install them correctly.

Other water leak related errors

The LE error is quite serious, because water leaking from the machine can flood your neighbors if you live in a multi-story building. But This is not the only error associated with water drainage. For example, if the water doesn't drain at all, error 5e appears on the screen. You can read about how to fix it in the article Error 5e on a Samsung washing machine.

When the water flows out of the drum along with the foam, the machine produces error 5dExcessive foaming can be caused by hand washing powder. Additionally, using too much powder can also result in excessive foam coming out of the machine through the drum or powder drawer.

To summarize, fixing the LE error on a washing machine requires patience and some skill. Before you try anything, assess your capabilities. It might be worth contacting a professional right away to avoid further complications.

   

Readers' comments