Why doesn't the washing machine rinse?

The washing machine has long been a familiar assistant in our daily lives. It helps us with laundry and frees up time for other, more interesting or important tasks. And if it suddenly stops performing well, we immediately notice. What should you do if your washing machine stops rinsing? It might even turn off after the main wash cycle, without even reaching the rinse cycle.

Most often, this malfunction manifests itself as follows:

The laundry cycle proceeds as usual. It lasts as long as the machine needs to complete this portion of the program. And when the moment arrives for the rinse cycle to begin, everything suddenly freezes and the machine freezes or shuts off.

What are the causes of this malfunction?

There are more than one or two possible causes for this problem. Let's look at the most common ones.

First, you need to pay attention to the drainage system. Specifically, check the drain pump filter, the drain pump itself, the external hose, and the internal pipes. Foreign objects or debris may have gotten into the hoses and filter. These can prevent the drainage system from working properly. Therefore, if such blockages are detected, they should be removed. If the drain pump is malfunctioning, it's easier to replace it than to repair it.

To avoid overwhelming you with too much information, we've decided to demonstrate how to remove and clean the drain pump filter in the following video:

Here's another video. It'll show you how to replace a washing machine drain pump yourself. Watch it:

Let's move on. A faulty pressure switch could also be the cause of our breakdown.

This is a small, specialized sensor. It monitors the amount of water inside the machine. It's also known as a level switch or level sensor. It's important to check its functionality, inspect it, and, if necessary, blow out the tube. A malfunction of this part can also have other consequences. For example, when the machine fails to stop filling with water and continues to do so.

To help you with this problem, we've prepared a video tutorial on how to replace the pressure switch yourself:

Another cause of this malfunction could be a faulty control module. The control module is a microchip that controls all washing machine processes, monitors data from various sensors, and monitors the washing process.

The module can fail for various reasons. For example, if water has spilled on its surface or if there's a power surge in your network. In this case, we strongly recommend professional repair. If you're not an expert in this field, the wisest solution is to call a home appliance repair technician.

In addition to the above-mentioned causes of breakdown, there's another: worn-out brushes on the washing machine's motor. Worn brushes can cause the machine to malfunction. In this case, they need to be replaced. Replacing them on models with a removable bottom is quite simple. You can watch a video on how to replace them below:

Conclusion

If you've read this article, you already know what malfunctions can cause your washing machine to stop rinsing. You've also learned how to fix most faulty parts.

If you've decided you can handle the repair yourself, we wish you good luck. However, if you don't want to waste time and effort, we recommend contacting professional appliance repair specialists. They know their stuff and can help you solve this problem.

   

1 reader comment

1. November 1, 2015 at 2:05 AM

   Nikolay:

   My Candy1D835-07 washer's warranty expired a week ago. That's why it's so frustrating. After a long period of filling with water, the valve closes and the "ALLERGY" button light flashes. The valve is fine, the inlet valve screen is clean, and the level sensor and its tube are intact.

   Answer