How to clean the inlet filter in an LG washing machine?

How to clean the inlet filter in an LG washing machine The quality of tap water supplied to consumers' homes leaves much to be desired. Purely clean water flowing through brand-new pipes is more of a pipe dream than a reality. Heavy metal impurities, sand and limescale particles, and rust—all these undesirable elements are present in the water, negatively impacting not only washing results but also the lifespan of the washing machine.

The purpose of the inlet valve is to protect the system from unwanted contaminants. To accomplish this, it collects all unwanted particles, which users must periodically remove. Let's look at how to clean the water inlet filter in a washing machine.

Description of the cleaning process

First, it's important to understand what this part actually is. Externally, the inlet filter looks like a small, cylindrical mesh. This structure traps impurities and debris from the water. The inlet filter can retain even the smallest particles of metal and dirt, but over time the mesh becomes clogged and does not allow water to pass through properly into the washing machine. Therefore, if you notice difficulty filling the tank with water, it is recommended to clean the part. The procedure for cleaning the inlet filter is simple.

Disconnect the washing machine from the power supply (unplug the power cord from the socket).
Turn off the water supply valve to the machine.
Move the machine away from the wall to gain free access to the rear wall of the case.
Place a cloth on the floor around the machine to absorb any water that may leak from the inlet hose.
Loosen the nut with the rubber seal securing the inlet hose. Turn it from right to left. The hose attaches to the washing machine at the top, on the right side.

It is important not to lose the rubber gasket, it is necessary for subsequent assembly of the machine.

Remove the filter mesh from the valve. This can be done by grasping the protruding part of the element with pliers.
Clean the filter under running water. If debris is difficult to remove from the mesh, you can use a toothbrush to remove any remaining dirt particles.
Check that the valve doesn't have an additional filter surface. LG models sometimes have a second mesh located after the main filter. If so, clean that too.
Place the removed mesh filter back in place.
Connect the inlet hose to the body of the washing machine.
Tighten the fastening nut, remembering to install the rubber gasket.

It's important to inspect the seal and the nut itself. If any components are severely worn, they should be replaced with new ones. After assembling the washing machine and connecting it to the utilities, check to see if the problem with water filling the tank has been resolved.

Is an additional filter needed?

If the inlet filter in your LG washing machine clogs frequently, it means your water supply is extremely hard. The first sign of increased water hardness is limescale deposits forming on the bottom and walls of your daily-used electric kettle. To soften tap water, you can install an additional filter element either at the entrance to the apartment or directly in front of the inlet hose of the machine. LG.

There are several worthy developments on the market forprotection of household appliances from scale formation and plaque. Let's focus on a few filter elements. Water filters

Geyser 1P. A mainline filter element designed for installation on the cold water supply pipe directly at the apartment entrance. This device protects not only washing machines, but also dishwashers, water heaters, heating boilers, and other appliances in the home from debris, clogs, and corrosion.

The filter cartridge is not refillable and must be replaced once it loses its properties.

The Geyser 1P housing can withstand pressures up to 30 atmospheres. This is a record-breaking performance among the latest filter elements.

Aquaphor Styron. This filter prevents scale buildup and improves the performance of detergents, reducing the amount needed. It is installed directly before the washing machine. The filter's internal filling lasts for 300 washes. The filter composition softens water and prevents the formation of corrosive deposits.

Aquaphor Styron is used exclusively for purifying industrial water.

A simple water analysis will help you determine which filter element is right for your specific situation. Based on the data collected, a filter is selected to address your weak points.

So, if you detect microparticles and impurities settling on the inlet filter of your LG washing machine, it's advisable to install a main filter element or purifier at the entrance to your home, directly before the washing machine. Water in most Russian regions is extremely hard, so this measure is definitely not unnecessary.