How to clean a Samsung washing machine filter

A washing machine that doesn't drain or fill properly isn't a reason to call an appliance repair technician. First, you need to make sure the machine's filters aren't clogged. What filters are we talking about and how to clear them in a Samsung washing machine?

Drainage filter

When draining from a washing machine, water passes through a drain filter, which traps small foreign objects that have fallen into the drum. The filter often becomes clogged with these objects, as well as debris, lint, and hair, leading to machine malfunction.Therefore, experienced homeowners know that it is necessary to regularly clean the drain filter.

Cleaning the drainage filter is not difficult, you will need:

1. disconnect the machine from the power supply and close the water tap;
2. in the lower part of the facade, find the plastic panel;
3. Using a flat-head screwdriver or other flat tool, open the panel that is held in place by latches;
4. take a low container, such as a saucepan or a large shallow frying pan, and also prepare a rag;
5. Move the machine slightly forward from the wall and then tilt the machine body back;
6. place a container of water under the filter and put a rag next to it;
7. Turn the filter head counterclockwise by hand;
8. pull the filter towards you;
9. rinse it under running water and also clean the filter seat from debris;
10. install the part in place.

Important! When screwing the filter on, make sure it fits snugly and doesn't wobble. Otherwise, water may leak during the next wash.

Sometimes the filter cap can't be removed. This is especially common if the filter hasn't been removed for several years, leaving it unaware of its existence. In this situation, you should not apply excessive force and grab pliers; you need to reach the drain pump from the inside. In a Samsung washing machine, this is done through the front part of the body; the entire process is described in the article. Replacing the drain pump.

Water inlet filter

In addition to cleaning the drain filter, you should also pay attention to the filter that lines the water supply to the washing machine. Unlike the drain filter, it doesn't clog as often, but there are exceptions. This depends on the dirtiness and hardness of the water being drawn in.

To clean this filter, you need to move the machine so that you can access the rear wall. Then do the following:

• turn off the water supply;
• unscrew the inlet hose from the inlet valve;
• Using pliers, pull out the mesh on the plastic housing; this is the filter;
• take an old toothbrush and clean the filter with it, you can use any cleaning product;
• After the procedure, insert the filter back into place and screw on the hose.

Preventing blockages

According to washing machine manufacturers, the drain filter should be cleaned at least once every three months. Basic washing instructions, often neglected, can make this cleaning easier.

• Before washing clothes, you need to make sure the pockets are empty, and if there is something in them, you need to take it out.
• You also need to check whether the details on the clothing are sewn on well: buttons, rhinestones, sequins, appliqués, etc.
• Inspect the washing machine drum; there may also be foreign objects placed there by a child or pet.
• If you have hard water, it is better to install water purification filter.

As you can see, cleaning the filters in your Samsung washing machine isn't all that difficult. You can do it without a professional, and it should be done regularly. Maintain your appliance properly, and it will last longer.

   

Readers' comments