How to properly use a Gorenje washing machine with a water tank

A Gorenje washing machine with a water tank is a real lifesaver for homes without a centralized water supply. However, this type of appliance requires extra care: a washing machine with a water tank should be used with greater care and caution. It's important not only to fill it with water but also to prepare the liquid properly. There are also other nuances to using the machine that owners should be aware of.

Preparing water for washing

A Gorenje washing machine with a water tank operates almost entirely autonomously. Before starting the machine, the required amount of water—approximately 30-40 liters, depending on the tank's capacity—is added to the tank. Certain water quality requirements apply: it must be free of debris and insects, which could subsequently get into the appliance's internal components and cause malfunctions. Therefore, you should pour purified or settled water into the container, and when using river or lake water, it must be pre-filtered..

The tank itself is equipped with a filter, but it only traps large particles, so the owner of the appliance will be responsible for ensuring the water is clean. To fill the tank, open the lid and fill it with liquid to the indicated level. After closing the lid, the washing machine is ready for washing.

Loading the detergent

Every household appliance model comes with an instruction manual with step-by-step instructions on how to use the appliance. However, some homeowners still load laundry detergent directly into the drum of their washing machine, rather than into the designated drawer. Gorenje, the manufacturer, warns against this practice, as modern detergents contain harsh ingredients that can damage fabrics or leave permanent marks and stains. Therefore, detergents should be loaded into the designated compartment.

The powder drawer of Gorenje household appliances is divided into compartments for:

• main wash – loading dry or liquid washing powder, marked with the symbols “B” or “II”;
• pre-wash – designed for dry powder or gel, it is marked “A” or “I”;
• Rinse aid - the smallest compartment where the fabric softener is poured, marked with a symbol in the form of a flower or a star.

The compartment for the main wash is used most often, the other compartments are used from time to time.

All additional detergents are also loaded into the main wash compartment:

• stain remover;
• bleach;
• anti-scale agents.

It is very important not to mix up the compartments, as incorrect loading of detergents can cause undesirable consequences for clothes and the operation of the household appliance itself.

Software settings and laundry loading

The Gorenje washing machine's programmer is quite simple and intuitive, so finding the right wash cycle won't be a problem. The program selector knob is turned clockwise to the desired setting, then the "Start/Stop" button is pressed. You can adjust the temperature and spin parameters before starting the program.

Loading laundry into the drum is one of the most important and crucial stages of washing. Proper placement of items not only allows you to achieve high-quality cleaning results, but also significantly extends the life of your household appliance.

To do this, you should follow a few rules. First, sort items by fabric type, color, and degree of soiling. Delicate fabrics such as silk, linen, and synthetics should be washed separately. If items have old, stubborn, or deep stains, select intensive, prewash, or soak cycles. Everyday items that simply need a refresh can be washed on a daily or quick cycle.

Before placing clothes in the drum, check all pockets and remove any items from them to prevent damage to the appliance or damage to the appliance. It's also best to remove all removable parts and clean them by hand. It's recommended to close all fasteners, and turn outerwear, knitwear, and terrycloth items inside out. This will prevent them from being damaged during washing and will preserve their original appearance.

Let's start washing

After placing items in your Gorenje washing machine, close the drum door and detergent drawer tightly. Ensure the water tank is filled to the appropriate level. Set the programmer knob to the desired position and start the appliance using the "Start/Stop" button.

The washing machine will begin working. It will operate autonomously, requiring no supervision. When the cycle is complete, the machine will signal with a beep.

There is no need to worry about running out of water – the tank capacity is designed for at least one operating cycle, regardless of the selected mode.

After the cycle is complete, the door will remain locked for 1-2 minutes. Afterward, the drum can be opened and clean items can be removed. It is recommended to leave the door and detergent drawer open to allow the internal components to dry and prevent mold growth.

   

Readers' comments