The dishwasher turns off during operation.

The dishwasher turns off.There are a great many faults. Only about one-third of malfunctions are detected by dishwasher self-diagnostics, leaving the rest to the repair technician. Today, we'll discuss a situation where a dishwasher shuts off during operation. This malfunction isn't uncommon, but it can still cause a lot of problems for the user. Let's identify the main causes of this malfunction and see how to fix them.

What is the reason for the power outage?

First, let's identify the symptoms of a malfunction. In this case, the dishwasher shuts off spontaneously, either immediately after starting a wash cycle or after some time. This isn't just a simple reset; the machine loses power completely. Re-activation is possible after 10-15 seconds using the on/off button. Why does this happen? What problems could cause this symptom?

  1. A power failure caused by an overload in the electrical network.
  2. Problem with the surge protector.
  3. The heating element or temperature sensor is faulty.
  4. The control module has failed.

The likelihood that the control module was the cause of the power outage is very small, but it should not be completely ruled out.

There's a similar problem that causes the washing program to reset. Keep in mind that this malfunction has its own causes and shouldn't be confused with the problem we're discussing. This will only confuse you and lead you to look for the cause in the wrong place.

We check and repair

network filter for dishwasherIt's a good idea to start checking the outlet. Try plugging the dishwasher into a different outlet and see if the symptoms persist. If the dishwasher works fine in a different outlet, there's no point in looking further, but if the symptoms persist, continue the search.

The next step is to check the surge protector, which in Electrolux and other dishwashers is located in the housing at the base of the power cord. Start by smelling the base of the cord. If you smell burning wire coming from there, you're on the right track. Remove the protective cover and visually inspect the interior of the surge protector. Are there any signs of carbon deposits or melting? Replace the surge protector.

If the surge protector was indeed the issue, remember that it's rarely the root cause of the problem. More often than not, the surge protector is the only barrier between a serious power outage and the dishwasher's electrical system. To prevent this from happening again and to avoid having to replace the surge protector, install a surge protector. dishwasher stabilizerThis device will protect the machine from such problems and ensure years of reliable operation.

Voltage stabilizers can protect not only your dishwasher but also other important kitchen appliances. If you purchase a powerful device, you can protect several appliances at once.

If the machine shuts off during a wash cycle, it's worth noting when the power goes out. It's a good idea to study the settings of the main programs. Experienced technicians can determine the cause of the malfunction by PMM heating elementThe moment of shutdown. Sometimes the dishwasher shuts off when the control module commands the heating element to heat the water pumped into the system. If the heating element is broken, it can cause an overload in the machine's circuit, and it will shut down very quickly.

If the power outage hadn't occurred, the system would have tested the heating element, detected a fault, and returned an error code. But a power outage left nothing but mysteries. What should we do? Let's check the heating element and the temperature sensor at the same time. The easiest way to access these components is through the side of the machine, and a multimeter is required for testing.

The control module is checked last, but we don't recommend tampering with it yourself. Consult a professional who can quickly check the machine's "electronic brain" and give a verdict.

So, a dishwasher can lose power during operation due to overload. This is generally obvious, but the cause of this overload remains to be determined. Follow our advice, and you'll be fine. Good luck!

   

Readers' comments

Add a comment

We recommend reading

Washing machine error codes