Electrolux dishwasher not filling with water

Electrolux dishwasher not filling with water Electrolux dishwashers are renowned for their durability and excellent dishwashing performance, but even they can malfunction over time. When your Electrolux dishwasher won't fill with water, it's a clear sign that it needs urgent diagnostics, which may require repairs to one or more components. Let's explore the possible causes of this problem and the best solutions.

The dishwasher requires maintenance.

This malfunction often occurs due to failure to follow the dishwasher's maintenance and operating instructions, or simply due to carelessness. First, check that the water supply is working properly and that water is flowing from the tap. It stands to reason that if the water supply is currently not working, the dishwasher will not work without water. pour the powder into the dishwasher

Also, make sure you always use only high-quality detergents in your dishwasher. Choosing the wrong household chemicals can not only negatively impact the quality of dishwashing but also the speed of cleaning. To prevent this from happening, try not to skimp on cleaning products and choose only proven household chemicals.

Finally, check the water supply valve located where the hose connects to the water supply. You may have closed it earlier and forgotten to open it.

Problems that stop water intake

If you've followed all the manufacturer's recommendations, used your "home assistant" correctly, and there are no problems with the water supply, then it's worth gradually checking for the most common causes of insufficient water supply. Experts identify the following as the most common:

the flow filter or the entire dishwasher system is clogged;
the inlet valve is damaged, blocking the water supply;
the door mechanism is broken, making it impossible to seal the machine hermetically;
the pressure switch is faulty;
the Aquastop leak protection system was activated;
The control board is out of order.

Let's talk in detail about what to do with the reasons listed.

Is the filter element clogged?

Unfortunately, the water in most Russian cities isn't the cleanest or softest. Due to the numerous impurities in very hard water, the dishwasher filter can quickly become clogged. This clogged water will either fill very slowly or not fill at all.

The filter itself looks like a small mesh designed to prevent impurities and abrasive particles from the water supply from penetrating and damaging complex equipment. If it becomes clogged, cleaning it is simple.

Turn off the water supply.
Unscrew the water supply hose.
The mesh is located where the hose connects to the dishwasher.
Clean the filter with a small needle, clearing it of any blockage.

For maximum effect, the filter mesh can be soaked in a citric acid solution for one hour.

After cleaning, reinstall the element, following the instructions in reverse order. Check the machine's functionality, and if the problem persists, proceed to the next diagnostic step.

Is the intake valve working?

If the water inlet valve is damaged, you shouldn't expect any water to flow from it. In this situation, it will simply stop opening after receiving the appropriate signal. It can also fail if it's constantly exposed to fluctuating water pressure or voltage. clean the intake valve mesh

If this happens, it's likely beyond repair. To restore your "home assistant" to normal operation, you'll need to purchase a new part and install it in place of the damaged one. This procedure is quite complicated for those without specialized training and experience, so it's best to call a service center technician to perform the repair yourself.

The dishwasher "doesn't know" how much water has already been collected.

Another common problem is when the control board can't determine how much water has already been drawn in and how much more needs to be added. This occurs when the water level sensor is faulty, either transmitting incorrect data to the control unit or stopping sending any water level information altogether. Consequently, when the control board detects that the pressure switch information is incorrect, the module shuts down the dishwasher for safety, preventing water from being drawn in.

You can diagnose the sensor yourself, all you need is a standard multimeter. Just follow our instructions carefully. dishwasher pressure switch

Disconnect the dishwasher from the power supply and water supply.
Turn her on her side.
Remove the lid from the bottom of the dishwasher.
Find the pressure switch, which resembles a plastic washer.
Use pliers to remove the tube from the element.
Use a screwdriver to remove the retaining screws, disconnect the wires and remove the sensor.

Don't forget to take a photo of the wiring so you can use it as a reference when you reconnect the part.

Switch the multimeter to ohmmeter mode and check the resistance of the element by connecting the tester probes to the sensor contacts.

If the water level sensor is truly faulty, the only solution is to replace it with a completely new pressure switch.

The electronic board requires attention.

One of the most frustrating causes of malfunction is a problem with the electronic board of an Electrolux dishwasher. It's responsible for receiving information from other components of the appliance and sending instructions to all its components. Therefore, if the control unit fails, the entire appliance will stop working. Fixing this problem yourself is virtually impossible, so you'll have to take it to a service center and hope the component can be repaired instead of buying a new one. the control board broke

In this situation, the only thing you can do is check the functionality of the control module yourself. To do this, strictly follow the steps in the plan.

Open the bunker door.
Remove all the bolts on the door.
Find the control board.
Inspect it for damage such as burnt wires and tracks.

If you notice any of these symptoms, you should stop using the dishwasher completely and seek professional help. However, problems with the electronic module are not always visible to the naked eye, so it's best to entrust a professional with not only repairs but also diagnostics, and not even attempt to check the component yourself.

Leak protection

The final inspection item is the Aquastop system. This is a special valve that can prevent an emergency flooding situation when a hose leaks. If the Aquastop is damaged, like many other parts in today's selection, it cannot be repaired; a new one is the only option. How do you install a whole part in place of the damaged one? Aquastop hose for dishwashers

Turn off the water supply.
Disconnect the hose.
Pay attention to the valve - when it is pressed tightly against the sides of the hose, the problem is hidden in it.

If the problem is found in the leak protection, simply replace it and the machine should be operational again.