Washing machine ratings
This article presents a ranking of washing machine manufacturers based on reliability. It is based on customer reviews and repairs performed at our service center.
Over the course of several years, employees at various service centers collected statistics on the performance of washing machines. The following factors were taken into account:
- the number and frequency of calls for breakdowns of a certain type,
- complexity of repairs,
- cost of replacement parts
- and other factors.
How to choose the right equipment
We always want to make the right choice when purchasing any household appliance. Whether it's a refrigerator, a washing machine, or a television, we want it to perform reliably and efficiently for years to come.
With a certain amount of money to spend, we go to the store, hoping to intuitively choose the best model or listen to the sales assistant's advice. Relying on your gut instinct when choosing a device is just as risky as trusting the salesperson's opinion. After all, the store employee is only interested in selling you the "right" brand and model. They're paid to do just that.
It's better to spend time wisely searching for the information we need online than to waste time and money running to service centers. You can learn more about each washing machine brand, compare technical features and specifications, and even view high-quality photos of the models. The only difficulty is finding objective reliability data.
Visiting specialized resources and forums with reviews from washing machine owners It will be a useful exercise. However, since there's no consolidated information, you'll find many conflicting opinions. Whose opinion should you believe, and should you believe it at all? Each opinion is simply someone's subjective experience or a deliberately written positive review, planted by the manufacturer to promote its own brand of washing machine, which isn't known for its superior performance.
Trust, then verify!
After gathering information on forums and reading reviews, turn to reliable sources—respectful mass surveys or repair service centers. The centers whose statistics we rely on in this article perform several thousand repairs annually, and they record a wealth of positive and negative reviews. Therefore, we're not afraid to take on the responsibility of ranking washing machines from various brands based on their reliability.
Data that were taken into account when assessing reliability
- Price.
- Trouble-free service life of the unit under intensive use.
- Quality of the parts used.
- Features and properties of the design.
- Build quality.
Machines with spin and energy-saving modes were considered, classified from "A+" to "B." The "C" rating was not considered at all. In this ranking, washing machines were not determined by sales volume, as not every buyer can afford such a high price. Instead, they were determined by their reliability over a three-year period from purchase. Brands such as Smeg, Schulthess, and other industrial models that are not widely available in Russia were also not considered.
Model overview and seat allocation
Miele is a premium German appliance whose high price is determined by its superior quality, guaranteeing a trouble-free service life of three years and, even after fifteen years, no need for scrappage. This brand is not included in the following chart due to its very low failure rate. The rare failures were due to electronics or customer error.
The German brands BOSCH and SIEMENS (for the purposes of this table, we'll combine these brands into one and label them BOSCH) hold the honorable lead in the ranking. The rate of malfunctions in their first few years of use is under 5%. Their excellent price-quality ratio is excellent. Electrolux, in second place, trails BOSCH by 0.5 percentage points. Zanussi, a brand produced by the Electrolux concern, confidently holds third place. Customer reviews were also taken into account. Zanussi's repair rate is no more than 7.1%. It's a good, affordable, and reliable machine.
LG and Samsung are quite good Korean-made models. They are affordable and have a wide range of models, earning them fourth and fifth place in our ranking. The breakdown rate for these machines is approximately 9%.
Former Italian cars now assembled in Russian factories: Ariston (20%), Indesit (25%), and Ardo (33%) occupy places six through eight. The large 11% gap is presumably due to the unpredictability of Russian assembly, which uses less-than-perfect parts. Unfortunately, many units from these brands fail within three to four years of purchase. However, with luck, 20 or 30 percent will last eight years.
The collected information is current for over a decade. Each manufacturer strived to reduce production costs. This led to a proportional deterioration in the quality of almost all brands. Reliability was assessed on a five-point scale. The graph is arranged in descending order of quality.
First three years of use: % of service requests
"Candy" was not included in the review due to the deteriorating quality of the new line. However, history remembers the reliability and durability of the early models. The "internals" of this brand are not at all valued by service centers.
We rightly allowed ourselves to ignore the BEKO and forget about the Rolsen. The Retona isn't worth mentioning either.
When choosing a washing machine, inquire about the materials and quality of the tank. Cheap models are highly likely to leak. And post-warranty repairs can be prohibitively expensive for such a cheap machine. Therefore, they are more often thrown out than repaired. Incidentally, in this case, it's really helpful to read customer reviews to see if the model you're interested in has this problem.
A study of the Russian washing machine market revealed that BOSCH and SIEMENS are recognized as the most reliable washing machines. Miele remains at the top and will remain unrivaled for a long time to come.
If you own a cheap washing machine, don't worry. It's not guaranteed to break down. Provide it with proper care, and it may serve you for many years to come.
Interesting:
271 reader comments
Add a comment
Headings
Washing machine repair
For buyers
For users
Dishwasher
I got myself a Siemens and I'm not worried about it. German assembly and a lot of useful programs make it high-quality and necessary equipment in the house.
My SIME (Siemens Sivamat) is 18. We bought it before the birth of our first child with maternity leave. It's served us faithfully. Believe it or not, the plastic hook on the sunroof lock broke, and we can't find it. I'm having trouble choosing. I'd like a reliable unit.
The Electrolux EW1677f (I'm writing this from memory) has been in operation since 2002, also purchased during the birth of my first child. And unlike your Siemens, nothing has broken, knock on wood.
We also have Electrolux, it has been in service since 2005, nothing has broken.
Nothing has broken for you yet today.
Find a turner and let him turn a hook out of a piece of plastic.
I also have a Siemens and the door lock hook broke too, I removed it, sent it to the factory - they made it out of steel, everything is fine for several years now!
Indesit, worked for 20 years.
Now I'm looking for a replacement. You won't find a car like this anymore.
I also had an Indesit for 21 years. 13 of those years were spent on two families (my parents were sick). Now I'm looking for a replacement. That's it. The "old girl" just can't keep up.
The Indesit top-loading washing machine has been in service for 21 years.
Buy Mile, you won't regret it. It's expensive, though.
Miele has the worst technology, terrible reviews, everything always breaks, it’s unclear why they charge so much money, Coopersbusch would be better then.
You're writing about Mele being #1 and having the lowest repair request rate. So who should I trust? 🙂
Is the Miele the worst technique? 🙂
This is nonsense. It's extremely reliable, but expensive. And the warranty is decent, unlike Coopersbusch. And $2,500 for a washing machine is way too much.
My Ardo is 18 years old; it was the cheapest, so we bought it. We'll be replacing it because the tires broke and started leaking (apparently they left something out of their pockets). Otherwise, no complaints, and it's the worst in the comparison chart.
My Ardo is over 20 years old. It's never been repaired, Italian assembly. It was returned in working condition. I'm debating which one to buy. They said Ardos are long gone. It's a top-loading dishwasher.
It can be printed on a 3D printer.
3D printing to the rescue.
The same thing happened.
I listened to reviews and bought an Elzhi LG. The repairmen couldn't get it under control. It was jumping all over the bathroom and breaking tiles. The repairmen offered to replace the floor tiles. I lost my patience. I sold it for half price, even though it was new. That's my experience.
I also bought an LG. Even without leveling it, there was only minimal vibration during the spin cycle, barely noticeable to the naked eye.
I had the same problem. Then I figured out how to unscrew the plastic bolts. They're for shipping, connecting the housing and the drum. The drum hung on the shock absorbers, and everything was fine. There was practically no vibration.
I recommended the LG direct drive to my sister, and she's thrilled. The tile installation was spotty, and her husband couldn't level it.
The unfortunate mechanic didn't remove the transport bolts; we had the same problem.
Your head needs treatment!
My AEG machine will soon be about 20 years old, it needs to be replaced, it’s a shame.
We had an old Siemens washing machine, the most basic one, that lasted about 15 years. Now we've got another Siemens, but this one is a smarter model – the IQ800. We've been using it for a little over six months, and our impressions are extremely positive. It's a machine you could only dream of…
Our Siemens turned 18 this year. I've only called a mechanic once, and he said they were the best machines. I'm already looking to replace it with something new, but after reading the reviews, I feel sorry for my current one.
I've had my LG washing machine for three years now. I'm very happy with its performance. Model F1092
I bought an LG and I'm not happy, it's jumping around, the case is cracked, judge the quality for yourself.
Ardo a800 manual washing machine, 10 years old. I recently replaced the motor brushes—they were completely worn out. The machine has never broken down, but it's true it's made in Italy and not for Russia. All the markings are in Italian.
Our Ardo T80X (Italy) has broken down 10 times already.
A800, I've only changed the belts in 15 years. It's a bit noisy during the spin cycle, though. But I lock it in the bathroom.
I had an Ardo A1000X (made in Italy) for 20 years. I replaced the motor brushes and the hatch opening mechanism myself. Now the gasket on the gasket has failed. When I took it apart, I checked the condition of all the parts—they were almost like new (even the bearings were perfect). That's what it means to not have it assembled in Russia!
Our family's INDESIT washing machine (Russian-made) lasted 12 years. My daughter killed it by pouring hand washing powder into it.
The assembly did not cause any complaints!
We also have an Indesit for 16 years now, it seems to be dying (it vibrates a lot during the spin cycle), but otherwise it served us faithfully...
Replace the shock absorbers. The cost is 1200-1500 rubles.
Who killed whom? Where are the facts? Grounding?
I can confirm the Siemens! We've had it for 12 years now, no problems! When the time comes, I'll get a similar one!
I have a Candy 655 xt. It's been around for 20 years! It's earned its $300 price faithfully. Nothing's ever broken and it still runs great. Only the bastard Cat broke the rubber seal on the sunroof, and now it's leaking. Now that's a good reason to buy a new one. Sleep tight, my dear friend!
We've had an LG for 17 years now. It recently broke again, the electronics failed. The repairman said these washing machines can be repaired forever. And the new ones are now made completely disposable.
Wash the cat
Zanussi served me faithfully for 12 years, now it’s the first repair, there are no original parts, it’s a pity
Ours has been serving faithfully since January 1998. Now that's European quality! It's a shame to part with it, but I wanted something with more modern features...
Our Zanussi has been running since 1988. It's Italian-made. The only repair I've had to do was replace the drain pump (I replaced it myself—it costs $3). When I disassembled it, I noticed the quality of the rubber, seals, and hoses—they look like new. It feels like it'll last another 25-30 years!
lies
My ZANUSSI has been working since 1996. It still washes and spins perfectly. The lid is rusty (it's a top-loading machine), but everything still works.
I confirm. My Zanusya has been in service since 2000. Once, about five years ago, I replaced the pump motor (myself) and that was it. A real gem, not a car.
I believe it because Zanussi is an Electrolux group.
In 2016, my narrow 32 cm ZANUSSI FL704NN, purchased in 2004 for $180, broke. The bearing started humming, so I bought a narrow 34 cm ELECTROLUX EWM1042NDU for $340. They keep asking me, "Why didn't you buy an Indesit or Beko for $150?" I'll show you your article in my defense!
Mine is the same age. Super car!
I had an Indesit, it lasted about 7 years. It broke a couple of times. Then the bearings failed. After that, I spent a long time choosing, and then I got an LG. It works almost perfectly, and it's much quieter. Two years in, and it's been going great. 🙂
It's finally time to replace the washing machine. My Samsung machine lasted 13 years, and I only had to replace the heater once. I'm very happy. Now I don't know what to buy.
I have an Ariston AL 109X MARGHERITA 2000, assembled in Italy. It worked flawlessly for 14 years. It only started acting up in 2015. I'm no handyman, but I used the internet to replace the bearings that were the first to fail. I fixed it! It worked! On the third try. A little later, the machine stopped during a wash. After analyzing it online, I blamed the brushes. Correct! Replaced it. It worked! The other day, the software control was randomly spinning in a loop. I went online again. Following their advice, I reset the machine, setting the program to 0, and unplugging the cord. It didn't work the first time. Only on the third. It worked! Recently, the drain pump started making a loud growl. It calmed down on its own! A few days later, everything is fine! I'll squeeze every last bit out of my Margherita. If anything happens, I'll have to find a replacement. I'll also look for something assembled in Germany or Italy 😉
My Margarita Ariston celebrated its 18th birthday! I pray for it every day! Italian-made, only minor repairs, like a pump... I'm afraid you won't find one like it these days...
I completely agree with Mr. Roman. I wanted to get one myself, but it didn't fit. I had to get a Siemens vertical. It lasted 12 years! Back then, the MARGARITA ARISTON was the best in its class! Anyone who bought one back then is afraid to trade it in for today's consumer goods!
I completely agree with you! Our Margo is 20 years old, and the standard, easy-to-repair repairs include bearings with seals, the water pump, and the motor brushes. The housing is already corroded in places. I can't find a replacement. Of the inexpensive options, an LG direct-drive washer is ideal for my family, but the company has a special service life limitation: a tapered shaft seal seat, from which the seal is eventually pushed out, causing water leaks and bearing failure (it should start to malfunction around the third year of operation), as well as "chrome plating" of the shaft (the friction point between the seal and the shaft). That's 6-7.5 years max. In general, watch the documentary "The Light Bulb Effect." It explains everything perfectly.
It's been working for us for 23 years now. No repairs. Italy.
Yes, and our Margarita has been working for 19 years already; we just replaced the heating element this year. Where can I get one like it now?
And my Margarita has been washing for 16 years now, without a problem. But its body has rusted, and now it's not pretty, but it still works. 🙂
Samsung is 11 years old. They replaced the pump—5-6 washes a month cost 8800 rubles.
Experts, where is Whirpool in the rankings?
The comments are good about machines made 10-15 years ago, but Whirlpools haven't produced enough data yet. Machines are unreliable now, and components are sourced from anywhere they can buy in bulk for cheap. I've had an Otsein for 21 years and it's been working fine. And now it's part of Candy—no praise...
My Italian-made Whirlpool Tot lasted 22 years, and only now the motor started overheating and the drum stopped spinning. The only thing that kept breaking was the plastic door handle, which was worth next to nothing. I'm not sure which one to choose. Judging by the reviews, I'm expecting it to last no more than 5-7 years. My mother-in-law has had a Siemens since 1993, and it's been working perfectly fine.
Our Whirlpool washing machine lasted 14 years and 6 months. Four years ago, the pump was replaced. Now the support has fallen apart.
I now have my second Whirlpool.
The first one worked faithfully for 18 years. I haven't gotten a new one for three years yet, and it's already broken five times. I'm fed up. I'm reading reviews and wondering if it's better to buy a used one from Germany than to buy another one of those fancy new ones, which I'll have to mess around with and spend a ton of money on. 🙁
In 1989, I bought a "Eureka" (Zanussi license). It's still working, but a year ago the shaft seal started leaking. I found a new seal for it at the market and was very surprised.
I installed it myself and it still works. I've been itching to buy a new, modern machine for years, but every time I read reviews online about breakdowns, I immediately lose the desire. The last time I was really done in was by reviews about broken Mieles, which
They're now assembled in the Czech Republic. What can you expect from other companies then? 26 years of work. That's what assembly was like in the Soviet Union.
We've been using Bosch for 18 years now, and we bought the German-made ones, the very first ones that came out. It does the laundry for four kids and my wife and me. Basically, it works every day without a hitch. I recommend it, thank you. 🙂
My Bosch is almost 20 years old. German-made. I've never called a repairman. They're bringing a new AEG today. I'm only replacing it because the old one doesn't have a timer (I really need one). I can't bring myself to throw it away; I'll just keep it in the garage.
We also have a German-made Bosch. It's been 10 years now, and we've had it repaired twice. The electronics have failed, but otherwise it washes perfectly.
The electronics and heating element in Bosch are weak and unreliable points.
Where can I get it now, German assembly... our production, every recall is a repair.
The WHIRLPOOL-12 has been working flawlessly. The electronic circuit board stopped it from working properly. The repairman fixed it after three washes. We're looking for a similar model. I love this machine like a wife for its beauty and reliability!
I have a Mele, and we've replaced three machines in three years because they rip things. I live in Italy, so exchanging machines here isn't a problem, but I'm very disappointed with this brand and will be asking the company for a refund.
We had an Ariston washing machine—we were very happy with it; it lasted for about 8-9 years. We replaced it with a Hot Point Ariston, which lasted another 4 years, but then it started jumping and rattling… We're currently looking for a new one.
We've been using an Ariston Dialogic for 17 years now. It's never broken. It's a shame they're no longer available. We needed a second machine and bought an Electrolux EWS 106410 W, but it broke after two years. So much for ratings.
Our first washing machine was an Indesit, lasted 12 years, and we gave it to my grandmother. Our second was a Bosch, but it broke after six years, and the repairs cost more than the machine itself. We're still scratching our heads.
My Turkish-made ALTUS washing machine served me faithfully for 10 years, sometimes performing several wash cycles a day. NOTHING broke down even once. And I never had any problems. Blankets, bedspreads, down jackets, pillows, machine covers... I've only never washed sports shoes. Of course, I've taken loving care of them. But perhaps even high-quality appliances have a certain lifespan. In January, the sunroof glass cracked, according to the repairman, due to age and the localized "beating" of metal objects (like jeans buttons). Since the machine is rare and Turkish-made, we waited almost a month for the glass. They installed it, sent a new one from VEKO, and everything was perfect. Alas, it stopped spinning. Most likely, the pump. I've decided to buy a new machine, as I suspect the investment in repairs might not be worth it with a ten-year-old machine. But...after reading the reviews, I'm thinking, maybe I should replace the pump first?)))
I have a 2003 Italian Ariston. I bought it at Auchan. The belt broke and the microchip in the control unit failed. Otherwise, it's fine, just a whistling sound during the spin cycle like a car's turbo, but it's tolerable.
The Samsung has been working like a "Papa Carlo" for 17 years and is still washing perfectly, except for the seal on the roller that broke yesterday—it's never broken before. It's a shame to lose such a hard worker.
"We rightly allowed ourselves to overlook BEKO and forget about Rolsen. Retona isn't worth mentioning either." It sounds incredibly snobbish. Why did we allow it? Explain. For example, BEKO cars have many good reviews online, which can hardly be reduced to brand advertising. The price is affordable, many people buy them, and they praise them... So what are the statistics for this brand? And any manufacturer deserves attention, really. Otherwise, it looks like a paid review... Which service centers collected the data, and for what period exactly? Who analyzed the data? Using what methodology, what statistical software? Or was it just a quick and dirty analysis?
I've had a Beko for 13.5 years without any repairs!!! And the day before yesterday it broke so badly that it's just easier to buy a new one. Now we're trying to decide what to get.
I've had a VEKO since 2000 and it's been working fine (2016) without any issues, but the spin cycle is very loud. I don't know, should I get a new one or enjoy the roar?
It lasted exactly three years and a month (just long enough to be voided under warranty), and now the bearings are so loose it feels like our high-rise building is about to take off. The mechanic's conclusion is clear: it's junk. We'll be getting a Bosch. Before that, the Zanussi worked for 17 years.
We bought a Beko a year ago, and it's a disaster. It doesn't remove even the most basic stains. It seemed fine at first. People praise it, probably because it's cheap.
14 BEKO worked. But it broke.
Our Veko lasted 18 years. I bought a Kraft one.
I had a Samsung for 10 years, and it worked like a charm. I couldn't even imagine that the appearance of the clothes you wear depends so much on the machine you wash them in! Now I know. My Samsung broke and I bought an Ariston instead. It's awful. The rinse cycle is at least 38 minutes! Cycles last 2.5-3.5 hours. My clothes turn into washed-out rags. I'll be replacing them.
I have an ASKO W510D washing machine for 12 years. The drive belt support broke. I'd like to have it repaired. Can anyone tell me where I can buy bearings and supports for this machine, but not the left-hand ones? Can anyone recommend the best quality washing machine available now? I don't see any reviews for the direct drive. Please respond.
Why doesn't anyone praise the Vyatka? It's been in service for over 12 years without any repairs.
I'll give the Vyatka a thumbs up. It's 14 years old, has all the necessary software, no unnecessary bells and whistles. Last year, it had its first breakdown—a leaking oil seal. The repairman found the original one. The repair, including my assembly and disassembly, cost 650 rubles. LAUGHTER!! With the current reviews, you can definitely keep your Vyatka for another 14 years.
Yes! The Vyatka is a great machine! It's been working for about 15 years now. It started spinning poorly, so I cleaned the filter and everything is back to normal.
We've had a Vyatka automatic since 1996. I really like it. My husband has actually done a few repairs himself. It served me faithfully for 20 years. Now it's starting to act up. Now I'm looking for a new one...
Bosch. German assembly. Has been in service for 18 years. Yesterday was the first breakdown.
We replaced the shock absorber and belt. The mechanic said they don't make cars of this quality anymore. The service life is 5 years, maybe 8 years if you're lucky, and that's it.
I agree with Sergey about the VEKO. It worked, a real sweetheart, for 15 years. I even had to move it from apartment to apartment. So, I got the VEKO now. And the old one will serve me well at the dacha, too.
Which one did you get? I traded in my Beko for an LG. I regret it.
I bought an ARDO A400 in 1996, a genuine Italian machine, and it lasted until February 2015, faithfully handling daily loads. The drum started making noise and wobbling, jamming laundry, and we retired it. Following my parents' example, I got a Bosch, whose washing machine is 20 years old and is still going strong, with no issues. So far, I'm happy with mine.
Electrolux - served me faithfully for 12 years. Yesterday it broke. It's time to replace it with a modern one.
Samsung. After 5 years, I had to replace the pump, and after another 5 years, I had to replace the drum bearings because the seal failed. So, in 10 years, I've had two failures. I'm sitting here trying to find a new one.
I've had my Beko for sixteen years, flawlessly and without repairs, but it's noisy. It was assembled in Turkey. But today I noticed that the pump that drains the water has started making an unnatural noise, louder than a tractor. I'm sitting here wondering...
Check that there are no foreign objects in the pump (pins and small change from pockets often end up there).
Bosch WV1201 - been working for 17 years! Damn - I'm so tired of it, I want something new! Not a single breakdown!
My 1996 Ardo served me faithfully for 15 years. They only replaced the pump once, but it always washed my clothes carefully and lovingly (including tulle and silk, a blanket, and even my sneakers). Four years ago, I had to switch to a Zanusi. What a disaster!!! It rips things, makes snags, and doesn't even mention the noise. It's always whining and about to take off.
This is my second Zanussi, and it's never torn laundry. The first one, however, started acting up after a few years, and the second one now only works on cotton and spin cycles. It shows an error on all other cycles. I'm planning to call a repairman. If the repairs aren't too expensive, we'll fix them, but if they are, it's cheaper to buy a new one. Basically, the Zanussi is a decent machine. It's just that all the machines these days are made to last less than optimally, otherwise, what would you do with all this overabundance of goods?
Three years of LG, washes quietly, does not bounce, vibration is barely noticeable, not loud, so as not to jinx it : ))) The downsides are that water remains in the rubber seal and the drain is noisy, but this is not critical, I am happy as an elephant.
I walked around the store yesterday and looked at washing machines. It turns out there are some with a sloped rubber surface, so water will drain off.
I have a direct-drive LG. I fell for the ad a while back, and after a year I replaced the pump (5,000 rubles). It's bouncing like crazy, and nothing helps (it's level on rubber pads). Sometimes I have to hold it with my hands to keep it from blowing the door out. I need to replace it, but what should I get?
Try removing the rubber seals. They're being pushed hard at stores. I had a similar situation with an LG—they threw out the seals, and it's still rock solid!
We have had the Eureka machine for 42 years now.
..amazing...that's QUALITY!!!!
So Eureka is a semi-automatic.
My Indesit has been working for 15 years...I've even washed screws.) Cons: It's an old model and vibrates when spinning at 800 rpm.
My Indesit iwub4085 lasted four years. It fluctuates during the 800 RPM spin cycle. Two electronic modules failed in four years. In short, I don't recommend it.
I had an LG, it galloped like a stallion! We sold it and got an Indesit. After two years, the brushes wore out... the mechanic replaced them for 2500 rubles. A year later, I replaced them myself for 300 rubles. A year later, I replaced them again—the bearing blew! I don't recommend either the LG or the Indesit!
My Philips has been going without repair for 30 years, and it could have gone another 20. But yesterday I ordered an LG, and now I'm wondering if I was too hasty. I'm thinking about replacing my appliances before retirement.
Zanussi, the first one imported to Ukraine. Honest Italian. It's been working for 20 years now. I only called a mechanic once recently to change the bearing, and he said it would last another three or four years. I'm very happy.
My HANSA machine has been running flawlessly for 14 years. It's easy to maintain, quiet, and has a tilting drum. It's a very good machine. Suddenly, the drum stopped spinning. The mechanic diagnosed bearing failure. He said original parts were unavailable, and replacing the existing ones would cost $90. The warranty on the work is only one month. He suggested buying a new one. But which one should I choose? I read the reviews and see that there are no suitable replacements.
I have a candу, and the drum stopped spinning just like that. It served me faithfully for 10.5 years. I don't know whether to try to repair it or buy a new one.
We had a CANDY for 12 years. I replaced the pump once. Then the bearings started making a noise. We decided to replace it and got an LG. Had I known, I wouldn't have bought it. After two years, problems arose that we hadn't had with the CANDY in 12 years.
Don't trust the mechanic. I changed the bearings in the car myself. And the shock absorbers. Everything works perfectly. I bought the bearings at the market, new ones. He wants to make a buck off you, and quite a bit.
The Hansa Aqua Spray is my favorite German-made unit. It's been working for two families since 2004. We replaced the bearings once, and now we're blaming the heating element. It's sitting there disassembled, waiting for its fate. Reading the reviews, I'm disappointed. I'll insist on repairs. To hell with this purchase lottery.
We've used Daewoos all our lives. What can I say, Japanese quality. It works until it rots.
Daewoo?
Japan? Since what year?
Then it would be better to say slanted quality ;D
LG Intello washer. 12 years of operation, no maintenance or repairs.
I'm sitting here crying. I've had a Veko since 1997, it's never broken, it's been with me through all my moves, it's smart, quiet, washes clothes very gently, and I've had no problems at all, but today the rubber seal on the sunroof broke. I live in the countryside, and naturally there are no repair shops, so what should I do? I don't want another one!
Try ordering, after all, the village isn't in the middle of nowhere 🙂
We bought an Electrolux top-loading washer in 2006. After two years of active use, a leak developed. An autopsy revealed that the top plastic part that fits over the drum had been soldered shut, and vibration had caused the cracks to reopen! The "5 Stars" store had closed by that time. I patched it with liquid plastic, and it's still working.
My Atlant washing machine at my dacha has been working flawlessly for six years, spinning perfectly, and it's quiet. I bought a Hotpoint-Ariston RST 601W for my apartment, but it doesn't spin as well at the same speed and is significantly noisier during both washing and spinning. It was a bad purchase.
Our Indesit, after 19 years of use, started making noise during the spin cycle. We called a mechanic, who said the bearings needed replacing, or better yet, the entire hub assembly. That'll cost 5,500 rubles. And then something else will break, and we're thinking about buying a new one, but we're not sure which one to choose...
If you don’t know, get BOSCH!
My Samsung washer has been working for 10.5 years, and today I woke up in the middle of the night and it wouldn't drain or spin—it's just crazy. It's such a shame, I love it so much, I've washed everything in it without exception.
My Ardo is from 1997, all the labels are in Italian, the load capacity is 5 kg, it works great, not a single breakdown in all this time, that’s reliable!!!
My eyelid is narrow and the top lid is getting hot. Please tell me what to do.
This is normal
I bought a new Bosch washing machine, 1200 rpm. It turned out it wasn't spinning properly, so the module needed to be replaced, meaning the spin program needed to be changed.
My Gorenje washing machine finally gave out today. The mechanic said a bearing had gone. They've already replaced the control unit twice (in Russian, to put it another way). It was jumping around the bathroom like a horse. It lasted six years. It's a shame. Even though it's not cheap. I'm considering a Boch or Siemens.
Why do you keep talking about 12 years and 18 years? Where are the reviews of modern 2014-2015 models?
A 7 kg DAEWOO with an air-drip cycle, in its eighth year, washes every other day, made in South Korea. It's become too small, so I bought another 12 kg one with a dryer, also a DAEWOO, and I'm happy with it.
Where did you buy the Daewoo, comrade? The top-loading one? I can't find one, and I don't want to buy another one—I don't believe you can put a wool coat in another one and take it out like new.
It's been in operation for three years, and during that time it's been repaired twice, $80 has already been invested, and now there's noise. The repairs will cost between $30 and $40, so think about it.
A domestically assembled Indesit top-loading washer. It's been working faithfully for 10 years now, without a single breakdown, but one problem: the top lid rotted, although we're still using it.
Bosch, German, 13 years old. Replaced the heater. Everything is fine.
My Otsein vertical washing machine has been around for 20 years, and it's time for a replacement. What should I replace it with? The reviews aren't reassuring. How should I approach the choice between 25,000 and 35,000 rubles? Any advice?
I've had an Ardo at home for 15 years now and I haven't had to call for service yet.
I bought the LG WD-8023CG (narrow) in August 2003. It sometimes jumps and hops (most likely depending on my mood), the rear feet are rotted, and the metal side feet are rusty, but it still works. Now I'm using it for my summer house, so I've settled on the LG again.
I've had a Siltal since 1998. I've had to fix it twice: the belt and the capacitor. It should work for another three years. It's a miracle machine.
On the second wash, the SIEMENS machine “died”, but the control module was replaced under warranty and it has been working for 12 years now.
And about the Vyatka, bought in 1993 and still in good working order. I replaced the heating element and the clear plastic cover for next to nothing, so I can't remember now.
We have an ARDO 800. It lasted 14 years. In the sixth year, the belt was changed, and I suspect the mechanic cheated me... then another seven years! The belt is still as good as new! Then the trouble began: three or four repairs: electronics, brushes, electronics again... The mechanic has been baffled for two weeks now...
We're thinking about getting a new one. Which one? We have so many choices...
The Margarita Ariston lasted 15 years without a single repair, but recently it started leaking and became obsolete. It was assembled in Italy. We replaced it with a Bosch 6 Series a couple of months ago. It's assembled in Russia. It's quieter and has a user-friendly interface. Overall, we're happy. We even managed to sell the old "Margo" on Slando, without hiding its advanced age.
They've clearly never heard of Whirlpool. It's lasted the longest. The Bosch didn't last a year, the repairs were expensive, so I bought an LG, and after two years, their vaunted motor broke. And the Whirlpool has been around for three years. It's a fantastic machine!!!
We've had a Bosch for almost 20 years, made in Germany. It's a big machine, weighing 7 kg. We only changed the brushes two years ago...that's it!!! We haven't had any repairs in all that time!!! It's great, I love it!!!
My Zanussi washer lasted 21.5 years—made in Italy. During that time, it only needed one repair—the belt had to be replaced and the heating elements cleaned. It was damaged either by frequent power outages (in Crimea), or because I washed a silicone dog bed in it and the silicone got under the drum. It's more likely the latter.
Does anyone know about the Vestel WM 1040 E 4? Friends are offering it, it's new. Is it worth getting?
My Whirlpool broke exactly one month after the warranty expired, or two years and one month. The control unit burned out, and the repairs cost more than half as much as a new machine. We bought a new one. I'll never buy a Whirlpool again. Everything I had in the house was Philips, and everything broke. Basically, I've said goodbye to that company, hopefully forever.
Guys, I have an ASKO and I don't care at all. My machine is 10 years old, and it washes absolutely AWESOME. It doesn't ruin clothes, and at 1000 rpm, almost everything is dry but wrinkle-free (you don't even need to iron it). I used to have a Bosch, and it's crap. If I were to replace it, it would only be with an AEG or ASKO.
I had a Whirlpool AWG853 for 11 years. I did a lot of laundry, sometimes three times a day (for two kids and a sick father-in-law). One of the two springs holding the drum broke, and I can't find it. Now I'm struggling with choosing a new machine.
Everyone, everyone, everyone! Take a purebred German, namely: made in Germany. A German is a German.
Our Siemens has been working faithfully for 15 years. We've had three repairs – replacing the heating element and something wrong with the bearings. Now it's started shaking when spinning, and the software seems to be acting up. We're thinking about getting a new one... Which one?
Definitely not Bosch-Siemens (the twin brothers)! We've had an Electrolux since 2002, and it's outlived our friends' and relatives' Bosch and Siemens machines, without a single breakdown! When people write here that a machine has been working faithfully for 15 years, but in that time it's only been in for repairs three times, I honestly laugh.
Best wishes to all! And good health to your hard-working white men. I have a vertical whirlpool. We bought it eight years ago for 14,000. We chose it by trial and error, simply because of the size. Knock on wood, it's working great!!! They're talking about 10-20 years here. Seriously, with the current dollar exchange rate, how much can you expect a washing machine to last for 15 happy years???? You probably won't find a decent one for under 20,000 these days.
I'd say from 40,000 rubles 🙂 In Europe, there are entire companies that develop materials and components with performance properties that ensure they last just a little longer than the warranty period, and no more. As an electronics engineer myself, over the past six years I've been constantly encountering microcomponents (resistors and capacitors) whose conductor coating dissolves after 4-5 years of use (even under the varnish coating), and the product fails. The same thing applies to solder (which oxidizes in 3-4 years), bearings (3-4 years and then it's over), plastic parts, and so on and so forth.
We've had a General Electric washing machine for 22 years. It was assembled in England and cost $715 back then. We've had three motor brush repairs. It doesn't tear laundry, has a "spring rinse" feature, and a 1200-rpm spin cycle—it leaves laundry almost dry. Now the bearing is dying. They won't repair it. I'm looking for a new one, but they don't import GE ones. Too bad!
We remembered... when the trees were big and vodka was 3.60. The question is, what's there to choose from now? Russian and Korean assembly. The best from the worst
That's what I'm talking about, the Zanusi is over 15 years old, it works, but it's very noisy, and it's not clear what to buy now, the reviews are all the same, good and bad
There was no 3.60.
3.62 — it was.
Our Vyatka Katyusha worked for exactly 11 years, from 2005 to 2016, without any problems or repairs. It washed perfectly and didn't rip clothes. All the parts were Italian, and the tank was stainless steel, unlike modern plastic ones! Then it broke: the water level regulator failed, which caused the heating element to burn out. I've already paid 3,300 rubles for repairs, and then the control unit has completely malfunctioned, starting to drain water on its own during the wash cycle, and today, even during the rinse cycle: it fills up and immediately drains. Repairing the "brains" costs another 3,000 rubles, and the bearings are already crumbling. In short, I've decided to replace the machine, although it's a real shame!!! But I can't choose: the prices are exorbitant, and judging by the ratings and reviews, only the super-expensive ones have maintained the quality... sad!!!
We've had a Whirlpool AWE 7527/1 since 2008, European assembly. It hasn't broken down yet. We wash three times a week. It's a bit noisy, but it's never broken down. We're looking to replace it with a Whirlpool, but we don't know of any recent models that are as durable. Could you please advise? We're replacing it because we're moving.
The Ariston AVSL 100 has been working flawlessly for 11 years without a single repair. It's Italian, though. I've heard that Russian-made Aristons aren't exactly known for their quality.
Zanussi, Italian assembly, 20+. One minor issue: a small Fiat model "parked" in the powder cap. The mechanic left in shock, as the unit was in excellent condition. Now I'm at a crossroads; I need to upgrade.
Zanussi is an Electrolux, hence its reliability.
I'm reading the comments: 3 years, 12 years... and how about 32 years? Vyatka automatic 12, nothing changed, the bottom is rotten, but it still washes. It uses hot water, by the way.
Our hard-working Samsung washer is dying after 12 years. I only replaced the drain pump. We decided to replace it because it's barely breathing. But which is better, LG or Samsung? Could you please tell me?
I read the ratings and also disagree about VEKO. We have a refrigerator of this brand and a washing machine that have been in service for 13 years now. The washing machine has also survived several moves and is still working perfectly, unlike my sister's Indesit, which has had three repairs in five years. Now we're planning a move and will also be getting VEKO.
After reading the entire internet, I'm still at the starting point. I still haven't made a choice...
Value for money, better than the Iberna, while they're still not cutting corners, it's worth buying. Even though it's assembled in Russia and the materials are Italian.
You simply can't buy anything Russian/Ukrainian/Chinese. I wouldn't recommend Turkish or most Italian products either.
The famous German-made BOSCH WFR-2141. It refused to turn on on the first day: it worked when I moved the wiring harness (probably a wire on the control board wasn't soldered). The entire board was replaced under warranty. It worked flawlessly for 10 years. This year, the bearings started making noise. I took it apart and replaced it myself. The reason: they didn't put sealant in the oil seal, and leaking water destroyed the bearings. So much for German quality.
Is the tank soldered?
All Bosch and Siemens water heaters have detachable tanks, meaning bearing replacement is hassle-free. Indesit, Hotpoint Christon, Electrolux, and AEG have non-detachable, soldered tanks. In these models, the bearing must be replaced as a complete tank assembly. And such repairs are often cost-prohibitive; it's easier to buy a new one.
You read all the reviews and see that almost all the machines, even with the same length of use, have the same problems. And people buy them purely based on brand.
I had an LG, it lasted seven years and would have lasted even longer without any issues, if only... My daughter-in-law started washing blankets and bulky jackets a lot, and the drum was warped due to overloading. I bought a Bosch, and I don't let anyone near it, I only do my own laundry, and the drum is the same story. Right after installation, I started noticing a slight wobble, but my family convinced me I was being picky. But no, now it's already knocking and the drum is shaking during the spin cycle. I called the service center, and they said it's similar to Bosch, but they don't overload me, the laundry is straightened out, and overall, I think mine is the best. I think they sold me an old, refurbished machine. They accept old appliances, so I think that's what I got. I'll go to the store, it's still under warranty. It's really disappointing to buy it for that kind of money, and it hasn't even lasted a year.
Siemens has been in service for 24 years, the door was broken, it was broken, can it be fixed or will someone give it to me?
My AEG vertical saw lasted 14 years. The "brain" failed, but everything else is in perfect condition. Where can I find a control unit? It's not available at any service centers.
My Siemens washing machine has been running smoothly for over 15 years, and there haven't been any repairs. My son stuck a chestnut in the water inlet pipe, and we called a repairman to get it out. I was surprised that the machine was like new after 10 years, and now the electronics are failing. I'll replace it, and then we'll think about another one.
I bought a Siemens wm14q4400e and was happy with it for a year and a month. The warranty expired. The drum rattled. A repair at a repair shop would cost half the price. It was made in Spain (probably not made by Europeans).
..Zanussi 1029...worked for 7 years, after 3 years there were only minor repairs... then, periodically, it would leak, before that it wouldn't work on certain settings, or wouldn't fill or drain properly... and so on. I'm wondering if it's worth repairing now? I had a Candy, for example, it worked for 15 years without any repairs. They gave it to elderly relatives (because they bought this Zanussi) - the Candy is still working for them (21 years now). They only changed some rubber bands... sigh... and this Zanussi is expensive and didn't last long...
LG has been in business for 25 years and still going strong. For some reason, nothing breaks.
My Candy has been working for 12 years, and during that time, the heating element was replaced once. I've been reading comments and reviews and still haven't decided what to buy, although I'm considering repairing it (the drum isn't spinning). It used to be easier, but I'm stumped: what should I do, how should I choose?
For me, the first requirement is washing quality. It's incredibly annoying to wash the same thing over and over again, even if you use a good detergent. Korean-made detergents, for example, are typically mid-priced. Their only advantage is their reliability, despite poor water quality and power surges. Perhaps it's because of their simplicity.
The latest Ariston machine requires a stable power supply. In our conditions, it's only reliable with a voltage stabilizer. The plastic parts aren't particularly durable (Korean ones are better).
It washes perfectly! The fragrances in the detergent can cause redness in small children, and I really dislike the smell myself. Ariston washes just as well if you use half as much detergent. As a result, the scent is very subtle and there's no irritation in children. I imagine more expensive machines wash even better. But my Ariston cost around 600 rubles, and it's well worth the price.
Regarding the frequent replacement of drain pumps, across all brands, one service technician admitted to me that their main source of income is replacing a faulty pump. This is only because the owners are clumsy or too lazy to unscrew the filter at the bottom and simply shake out change and toothpicks.
ZANUSSI, model 3105, assembled in Italy, top-loading, purchased in January 2007, has had two repairs, including bearing replacement. It's noisy during the spin cycle (oh well, I'm not supposed to sleep next to it). A month ago, the bearings started failing again, even though I wash very often, don't overload the machine, and spin at 400 rpm. I went to look for a new one; after all, it's been running for 9 years and 11 months. I looked, listened, and read online... I've decided to get mine repaired. They picked it up yesterday. It's being delivered today. The repair cost is 700 UAH (repairs) + 100 UAH (transport) = 800 UAH. Incidentally, a young woman at the store whispered to me that they make inferior machines now and it's better to repair the old ones if the repair costs are under 2,000 UAH.
Here's what's changed in a year. The machine has been working fine for the past year. However, the lid has rusted so badly that I had to cut out a piece of the trim with metal scissors. It was preventing the lid from opening fully, catching on the control panel (the rust had swollen where the lid and control panel meet). Replacing the lid at a service center will cost 60 euros for a new lid + about 700 UAH for labor. That's 2,600 UAH in total. A lot. I've decided to use it until the end. Let it wash as much as it can. The reason is that there are currently no decent machines on the market. Even buying a used original is better than buying a new one for 4-5 years at a high price.
We had an LG washing machine that lasted 9 years under average load. After that, we had a Bosch, but heavy use led to its failure after 4 years (bearings). We're currently looking for a new machine; repairs are expensive, according to repairmen. The combination of quietness and reliability isn't found in reviews.
Daewoo, bubble-shaped, 25 years old. The water pump failed, unfortunately, there is no replacement. Otherwise, no complaints.
It will have to be changed.
My Siemens IQ500 worked for three years and then simply wouldn't turn on. The board, which costs over 12,000 rubles, burned out. That's the "quality" part.
I recommend paying attention to the company Körting.
I have a Miele. It's been working perfectly for six years. Before that, I had an LG, but the drain pump died in the fifth year.
Don't confuse the quality of older washing machines with today's. Five years of operation is beyond the norm these days. Regarding Bosch and Siemens, I'd argue with the author of this article. Buying a washing machine these days is a gamble, whether it's economy or luxury.
I bought a Bosch WOT 20352 OE washing machine in February 2013. The electronic unit was replaced under warranty. Today, February 8, 2017, the electronic unit failed again. I'm disappointed.
Bosch doesn't have its own factory for top-loading machines, like yours. Therefore, top-loading machines under this brand are assembled at third-party factories. Previously, these were Brandt factories. For the past few years, they've been made by Whirlpool. So, you shouldn't draw conclusions about Bosch quality based on top-loading machines. Their own machines, from their own factories, are front-loading machines.
I have an OKA-6 dual-clutch wagon, it's been running for 30 years. The bearings don't need replacing, just greasing. I'm happy. The car is a beast! It serves me faithfully.
Ariston, I only washed in the winter and not every day, and in the summer I'm at the dacha, and the machine I got was a piece of junk. I replaced the bearings last year, and now it's filling with water, but the drum isn't spinning. I'm thinking about getting a new machine, but I'm afraid I'll make another mistake. My daughter bought a Zanussi in December, and she's not happy with it. She told me not to buy one. Help, which washing machine should I buy?
LG - this is good!
We have had an Indesit for 15 years now. The belt needs to be changed.
They wrote about the ARDO, but mine is 16 years old, has a dryer, costs $300, is Italian-made—and hasn't had a single breakdown! So, masters, that's a lie!
The Indesit WISL103, one of the cheapest, worked for seven years. Then the heating element failed, followed by the electronic module (the brains). The repair cost was about 5,000 rubles.
I bought a Bosh WAA20727CE in 2012. Five years later, the tank crosspiece cracked. Replacing just the entire tank assembly costs more than half the price of a new machine. So much for Bosch.
It's a pity I didn't read this 2 years ago :O(
It's not the length of ownership that matters, but the actual operating time in hours. A bachelor's machine will be mostly idle, so wear and tear will be minimal. But for a family with three children, the same machine won't last even two years with daily washing, simply due to wear and tear. Our Siemens Siwamat Plus 7471, purchased in 1996, lasted without any maintenance until February 2017, when the control board burned out. Admittedly, we didn't use it very often (about twice a week).
I bought a Bosh WLK24271OE in 2016. It works fine, but it's very aggressive on all programs and ruins laundry. It definitely won't handle delicates, even though it has programs. The programs differ only in wash time and temperature.
BEKO was purchased in 1998. In January 2017, the shaft bearings broke and the oil seal began to leak.
It worked for 18 years (!) without any breakdowns or repairs.
I bought a set of bearings (2 pcs.), seals, and sealant, and fixed it in a couple of evenings. It works!
Turkish assembly, if I'm not mistaken.
I had an Italian-made Indesit Moon, easy to use and comfortable to use. It lasted almost eight years, but alas, the bearings broke. It was repaired, but it didn't last long, only six months, and now it's broken again. I'm at a loss and in shock, not knowing what to buy, as it's difficult to find genuine foreign-made models these days, and I absolutely don't want anything Russian-made.
Well, I don't know, my Indesit hasn't broken down once in four years, and it washes like a charm. And it's very user-friendly. It must be the people and how they handle it, because everything works just fine for me.
LG 11 years old, two months ago, I replaced the heating element. I did it myself.
The Electrolux EVT-911 is amazing! It's been working for 13 years.
Ardo was ranked last. Mine lasted 16 years without a single repair or complaint, washing everything. Apparently, it was a fluke. The day before yesterday, it wouldn't spin, and the technician tried to fix it, looking at the white case and poking at every button. Now it won't wash, rinse, spin, or drain. He's ruined it, and if the repair shop hadn't arrived, I'm sure it would have worked for another five years, like new. I'm going to take it apart myself today.
I've had an Ardo since 1998. I replaced the heating element about eight years ago, and that was because a sock got caught on it and jammed the drum. It makes a terrible noise, though, and the shock absorbers don't work.
Samsung M1200, 2000, replaced the water pump three years ago. Yesterday, the door lock failed, taking with it the thyristor, the trim resistor, and the electronic key chip. Everything was charred. Apparently, the control processor is also finished. If there was a control relay, it would be a mere penny to repair, and you could replace it with almost any other one. As it is, the washing machine needs replacing.
People, if you want to protect your health, don't buy a Bosch! It washes terribly, doesn't clean anything, you have to hand-wash it first and then put it in the machine. But the worst thing is that it rinses even worse... especially terry towels. I heard on TV that you need to thoroughly rinse your laundry to remove detergent. I threw two terry towels (70x140 cm) into the machine at 60 degrees cotton, the cycle ran, and everything seemed fine. I decided to do an extra rinse, rinsed seven times, and all that foam. Where did it come from? I started an extra rinse for all the laundry - the same thing, except towels 5-7 times, bed linen 1-2 times. I was furious with this kind of washing, I thought my 7-year-old machine was malfunctioning. Three days ago I bought a new one, the same 80x60x40 (others don't meet the parameters) and the same thing. Bosch is yesterday's news!
Please write the model, we were planning to buy Bosch.
I had a Samsung unit for 10 years. The tank was leaking from the start. They fixed it under warranty and haven't had a single problem since. Now the door lock and control board have burned out. The repairs cost over 10,000.
Those who complain about Bosch, you most likely have a Russian assembly; German machines are like night and day!
Our simple Zanussi FA832 (Italy) has been in service since 2006 without a single repair. We're afraid to buy a new one unless it's a German-made Bosch or Siemens, but then the price tags come with that. We don't trust either LG or Samsung (both Russian-made), considering the reviews and YouTube videos of the new LG's drum breaking after two washes. That video alone was enough... it feels like it's made of the softest tin, it's awful! Long live Zanussi! 🙂
I have a Hotpoint Ariston washing machine. I'm completely happy with it; it's been serving me faithfully for years now. I haven't had to call for service yet.
We have an Indesit top-loading washer, and it's been working flawlessly for 13.5 years. Now it's starting to malfunction (it'll turn on and then freeze). I don't see the point in repairing it, so we decided to buy a new one.
I never would have thought the Indesit would break down so often (judging by the rating). Maybe I'm lucky, but in four years there haven't been any breakdowns, and I don't think there will be any.
By the way, I have a Hotpoint Ariston, most likely Russian-made. I wouldn't call it unreliable; nothing's happened to it for at least three years. And it washes well.
We bought an Ariston Hotpoint (a rare piece of junk). It worked for three years, the electronics kept breaking, and now the bearings are failing! The gas tank is non-removable, and repairs will cost 6-8 thousand rubles. We're considering buying a new one. Our first car, an Ariston Margarita Cashmere, has been running for about 15 years now; we've replaced the water pump and bearings!
I cut up four of these tanks myself and assembled them with SKF bearings. My fellow villagers are happy.
I want to replace my washing machine. My Samsung, a slim one, lasted 18 years. Everything was fine, but everything slowed down. It takes a really long time to fill with water. I thought the reviews would help me choose. They boast about old machines. I have the same old one. As for what they say about modern ones, I don't understand.
I have an Electrolux EWT11420W washing machine, purchased in December 2011. I replaced both bearings in 2015, and now the electronic board needs replacing. I need to buy a new one.
I have an Electrolux EWT11420W top-loading washing machine. I bought it in December 2011. In 2015, both bearings failed—replacement cost €100. Now, not a single program works, and the electronics need replacing. I'm looking for a new one.
Zanussi FLV 504NN. It worked for 18 years, two years for two families. The pump was replaced four years ago, and that's it.
We've been washing clothes in a Hotpoint washing machine for six years now! It handles a lot of laundry. Great job!
I bought a Candy CY 124 TXT washing machine in May 2007 for 13,000 rubles, made in Italy. I chose it because of its 33 cm depth (actually 37 cm including the hatch) and 4 kg capacity. Although narrow machines tend to "wander" around the bathroom during the spin cycle, I didn't experience this problem with this one because it was level.
Recently, a metal-grinding sound started to appear during the spin cycle. I was thinking of replacing it with a new Candy, but the reviews for that brand are overwhelmingly negative, and it's assembled in Russia. So, the question is, what should I replace it with? The options are very limited at this depth.
Hmm, yeah, in short, it's all crap these days. The quality is crap. We had an Indesit in our rented apartment for about seven years. Even though the neighbors were constantly overloading it. It was practically throwing up, and by the end, the drum was shaking wildly during the spin cycle. And I also didn't like it. All the laundry always has to be in the duvet cover. 🙂 The problem is that we don't make anything ourselves. We need to start our own production, not feed China. Everything is made there now. And everything is of crap quality.
We bought a Samsung washing machine with the ability to add more loads during the wash cycle. It's the lowest-end model in the lineup. The most surprising thing is that you can't hear the motor, only the gurgling sound of water. But socks get stuck between the glass and the rubber band—there's a niche there, and small items get caught in it.
I have exactly the same Indesit model mentioned in this article. I can confirm it's a good unit. It's never disappointed us.
I have an Indesit car from 1998. Italian assembly. It works flawlessly. Never had a single repair.
I have an LG with direct drive. We bought it in 2009. After seven years, the stop/start button started sticking. I took it apart and pulled it out. Now there's a small hole in it, but it works. I just gently turn it on by pressing the sensor. I'm very happy with the washing machine. I recommend it.
I've had my LG for 7 years now. I'm happy with the machine.
Washing machines. By quality and technology:
In December 2002, I bought an Indesit W105TX. In February 2018, the bearing started grinding and the control knob kept turning. The first one is clear—it needs to be replaced. But what could be wrong with the appliance?
We have a hacker. Pure Chinese. We bought it in 2011. The pump, filter, bearing block, heating element, and seal have all failed. I wash 2-3 times a day. During the last repair, the repairman said there was nothing left that could break. It will serve us well for a long time. He noted the good build quality, but said that the water in our region is very hard, which is where all the problems come from.
I've been using a Whirlpool for washing at home for years without any problems. I recommend this brand to anyone looking for a good home washing machine.
You obviously bought it a long time ago. Old washing machines are almost always good. We bought it four years ago. It lives its own life, washing when it wants, and then just sits there when it wants. We've had to repair it three times. They don't consider it a warranty claim, so we're paying out of pocket. Now it's broken again today, so what new should we buy? I won't be repairing it again. It's the worst washing machine we've ever owned.
I own a Hitachi washing machine, imported from Japan. From the domestic market. Assembled in Japan, too. It's simply out of this world! The build quality is impeccable! It's barely audible. Before that, like all decent Russians, I owned Bosch, Siemens, and Electrolux. I've had them in various places, from rented to owned. And let me tell you something. These brands are a world away from this machine of mine, which I've been happily using for eight years now. And keep in mind that back then (in 2010), I bought a rather basic machine compared to what I was offered. Japan already had machines back then that you can't buy in Russia today. Perhaps, with the exception of the luxury segment, where there are some good deals. But those are for 100,000 rubles and up.
There's nothing better than the Vyatka automatic. It's been in service since 1985, 33 years already. Of course, it's been repaired a couple of times. Parts are still available.
It's great when people are so thrifty 🙂 and their machines and spare parts are from the time of the king of peas. But the design and noise performance, I'm sure, leave much to be desired. My Indesit has been doing our laundry for many years now, and it looks quite decent, despite being inexpensive back then.
I've had a German-made Bosch washing machine for 18 years now. The only problem I've had is the heating element, which I've replaced three times, because we have very hard water in our area. I also have a Bosch dishwasher, which has been working flawlessly for 13 years.
We have an AEG. The old thing worked for over 20 years. I don't even know how old it really is. They gave us a used one. The machine is fantastic. It washed perfectly the whole time, without a single problem. But it's also retired now. I want an AEG too.
My ZANUSSI has been working since 1998. It still washes and spins perfectly. The lid is already rusty (it's a top-loading machine), but everything still works. I couldn't be happier!
We had a Bosch, bought it about 20 years ago. Made in Germany. We had trouble with it for about 6 years. There were no breakdowns, it was quiet. But the washing quality was terrible! We had to run the rinse cycle 2-3 times. The clothes were washed out, slippery and sticky from the detergent after washing. We sold it.
My Ariston Margherita 2000 broke. It lasted 15 years. It doesn't fill with water. I don't even know what to buy. I'm reading reviews and can't find a reliable model under $300. Can you recommend a reliable front-loading model?
I'm lucky, my Indesit, which costs 20 rubles, works like a clock (not in the sense that it tells time, but in the sense that it doesn't break down or malfunction).
We've been using the Hotpoint VMSG 622 ST B for a little over a year now, and it cost us just under 20,000.
I can't think of anything worse than a modern domestically assembled Bosch. Both washing machines and refrigerators work exactly until the end of the warranty period. That's what the service technicians say. Their service center is swamped with Bosch appliances. Repairs are incredibly expensive. First, my door lock broke, then the electronics died. Out of nowhere! Model: Classixx5.
The most reliable one is Tula. The tank/body is aluminum. In 50 years of operation, I've only replaced the power cord. The rubber insulation has deteriorated. I gave it to a local farm.
My mom has had a Zanussi since 1997 (21 years). The only thing that broke was the door handle, which broke after 15 years of use. Nothing rusted, the body is intact. It still works.
Another one has been working in a rented apartment since 2001. The owners say it's still Italian-made—the indestructible Zanussi FA822-1 AquaCycle 800.
We bought a 3.5 kg Samsung (Korean) in 2003. It works flawlessly. If I were to buy a Samsung, it would only be a Samsung, but where do they sell the Korean version? Finding one is a real challenge.
In Korea)))
We bought an ARDO A800X washing machine in April 2001 and have been using it since November 2001. In September 2018, I replaced the belt because the old one had started peeling. Then it started overflowing with water and wouldn't spin. I replaced the pressure switch, but it turned out the hose leading to it was clogged. Then the heating element burned out, which I replaced. And today, November 20, 2018, the electronic module burned out, costing 7,400 rubles. The machine served me faithfully for 17 years. I'm looking for a replacement.
I bought a Siemens (we bartered it) and it's been working since 1990. The housing is rusty in some places, but it still works. I only changed the pump.
I haven't had any problems with Hotpoint either. Once, during a thunderstorm, the power went out in the evening, and the TV wouldn't turn on (it turned out the circuit board had burned out), but the washing machine didn't seem to be affected. But in the future, we'll try not to fall asleep with the appliances on. 🙂
Machines these days are very water-efficient. And that's a big downside. We've had an Electrolux EWF1287EMW for a year now, and we love it, but we have to top it up.
We recently bought a Hotpoint washing machine. And I must say, it's made my life a lot easier. I can even wash my down jacket on a delicate cycle without clumping.
In February 2015, I bought a Bosch Way28790EU washing machine, German-made. It worked for three years, but the display broke a month ago. They say it's 80% of the original price. The machine costs $1,150-$1,200, and I'm racking my brains over whether to buy a new machine or a Bosch display.
But my BEKO has been working for 20 years!!!
And it works, but there’s a leak…
I took it apart and found that the thin seal in the drum itself, between the drum "cup" and its lid, had dried out. Nothing lasts forever.
When it came to buying a washing machine, we went with an Indesit. It's a reliable manufacturer that has never disappointed us.
I'm on a budget and, after extensive research, I chose the Atlant 50U88 (disassemblable tank, drum balance control, leak protection), but I'm concerned about the commutator motor. Any advice?