How to remove the cover of an Indesit washing machine?

To fix even the smallest problem, you'll have to remove the top cover of your Indesit washing machine. It's not difficult, but it can be a hassle for a novice technician. Rather than rushing to a service center for every little problem, it's easier and cheaper to learn how to partially disassemble the machine yourself. We'll explain how to proceed and what to watch out for in this article.

What challenges will you face?

Most washing machines have no problem removing the lid—the panel opens easily and without much effort. However, on Indesit models, this task can be very difficult and risky. The problem is that the part is held in place by molded plastic latches. These are so tight that they often break, which only makes matters worse. You must not allow the latches to break off, otherwise you will not be able to return the plastic piece to its place.

Before disassembling the washing machine, turn off the power and disconnect it from the water supply.

The second danger lies in a simple failure to observe safety precautions. But here it's simple: before any manipulation, the machine must be de-energized and disconnected from the water supply.

Removing the cover on the front model

The procedure depends largely on the washing machine model. For example, to open the top lid of a front-loading Indesit washing machine, be mindful of the tight latches and proceed carefully. This will help avoid problems and prevent further damage. However, to do this, you must follow the instructions exactly as directed.

1. Find the two screws on the back panel that hold the top cover in place.
2. Remove the bolts using a Phillips screwdriver.

It is strictly forbidden to pry the lid with a screwdriver or a knife, as this will break the plastic latches.

3. Go from behind and, lifting the back of the cover, pull it towards you until the latches “engage”.
4. If the lid doesn't budge, you need to change tactics: go from the front, press on the top of the plastic part and push it towards the back wall.

The most common mistake when opening the lid on Indesit washing machines is trying to pry the panel from the side or front with a knife. This won't help with removal and will only create unnecessary problems. The problem is that the latches are immediately damaged and broken when tampering with this way. While this may remove the part, it won't allow you to put it back. It's best to take your time and avoid trying to outsmart the system. Use a screwdriver only to unscrew the screws, and do the rest by hand.

Removing the lid on a vertical model

Owners of top-loading Indesit washing machines face a slightly more complex task. If the laundry door is located on top, disassembling the machine requires removing not only the cover but also the control panel. But first, it's important to determine the purpose of the intervention: if you only need the door, unscrewing a couple of fasteners is sufficient. However, the top panel only comes off along with the control mechanism. To avoid complications with complete disassembly, we recommend following the following instructions.

1. Unscrew the screws on both sides of the housing at the back, directly under the dashboard.
2. Tilt the panel forward and remove it, carefully unhooking the module from the washing machine body.

Be careful with the wires connected to the control panel.

3. Remove the screws holding the cover located under the instrument panel.
4. Remove the cover.

Despite the tight latches and the need to remove the dashboard, opening the lid of Indesit machines is not difficult. The main thing is to remember safety precautions and proceed carefully and persistently.

   

Readers' comments