Haier tumble dryer not drying

Household dryers are indispensable devices that make our lives easier in today's hectic pace, where time to dry clothes is scarce. However, even such reliable appliances can encounter problems. Today, we'll find out why your Haier dryer isn't drying and what to do if this happens.

First, let's restart the dryer.

There may be various causes for this malfunction. One common cause is clogged filters. Dust particles, fibers, and other contaminants can cause them to become clogged and stop working properly. In this case, you should regularly clean the elements after each use to prevent them from becoming clogged.

Another cause of dryer malfunctions can be incorrect program settings. These are typically selected based on the type of fabric and the volume of clothes. If the wrong setting is selected, the machine will stop working effectively. In this case, it is recommended to review the selected drying program settings.

If you notice that your laundry isn't drying properly or the appliance is making strange noises, it's probably overloaded. Instead of loading all your laundry at once, it's best to dry it in batches. Overloading can cause wear and tear on parts and impair the appliance's performance.

More serious problems with drying in the unit may be associated with a malfunction of the electronic components and mechanisms!

Many dryer users believe that simply turning the power button off and on again is enough to reset their dryer. However, to properly reset the system, certain steps must be taken. Here's what you need to do:

• turn off the device by pressing the “Power” button and wait about 15 seconds;
• remove the power plug from the socket and do not take any action for about 10 minutes;
• Plug the power cord back into the socket and turn on the appliance.

The reboot is now complete. If the problem persists, we recommend performing preventative maintenance on the device. Be sure to follow the manufacturer's care instructions for your "home assistant" and check its condition regularly. This will help prevent future problems.

We will remove all kinds of dirt

First of all, pay attention to the heat exchanger, which should be cleaned manually at least once a month. This is important because deposits, dust, and other contaminants can negatively impact drying efficiency, increasing cycle times and reducing results. If not maintained properly, the equipment may lose its functionality. Remember: the frequency of cleaning depends entirely on how often you use the device.

To clean the appliance yourself, first unplug it and wait until it cools completely. Then, place old towels or rags underneath the appliance to prevent any remaining water from spilling onto the floor. Once these preparatory steps are completed, you can begin the cleaning process itself:

• find the heat exchanger door (it is located at the bottom of the front panel of the device, but can be located on either the right or left side – it all depends on the dryer model);
• open the door and then turn the block levers towards each other - this is necessary in order to remove the top cover of the unit;
• Carefully remove the element and clean it thoroughly using a strong stream of tap water.

If you notice stubborn dirt, remove it with delicate sponges and cloths. Avoid using sharp objects or hard tools with abrasive surfaces to avoid damaging the heat exchanger and causing serious damage. Even minor damage to a vital component can lead to unit failure.

It is important to note: contamination must be removed not only from the main part, but also from the seal!

There's no need to wait for the component to dry completely; you can replace it immediately after removing all the liquid. Carefully place the part in its proper place and secure it with the protective cover and locking levers, returning them to their original positions. As you can see, cleaning the heat exchanger yourself is easy, as it doesn't require any special tools or professional skills. What's more, the process only takes about half an hour. So don't be afraid to do it and don't put it off.

Possible breakdowns?

If the dryer still doesn't work after cleaning and rebooting, there's a hidden problem that the diagnostic system couldn't detect. Otherwise, the error code would have already appeared on the screen. Therefore, you'll need to investigate the cause yourself, examining possible causes based on the relevant symptoms.

A faulty thermostat, which controls the heating element's temperature, often results in the dryer failing to dry laundry sufficiently, leaving it damp and smelling musty. To resolve this issue, the thermostat needs to be replaced by a service center. A damaged sensor can also cause the heating element to overheat, which will result in overdrying and even burning of clothes. Therefore, carefully monitor the operation of your device to avoid such troubles.

The heating element is responsible for heating the air in the washing machine's drum. Its failure can lead to serious problems. Damage to this element often occurs for the following reasons:

• excessively frequent use of the drying cabinet (according to the regulations, the interval between starts should be at least 40-60 minutes);
• belated cleaning of the drum from accumulated fluff, wool and lint;
• faulty temperature sensor;
• moisture that gets on the heater.

Another cause is sudden power surges. In remote areas and private homes, power supplies are often unstable, which can have serious consequences. Voltage fluctuations, ranging from 180 to 250 volts, require protection in the form of a backup power supply, stabilizer, and rectifier; otherwise, household appliances can fail very quickly. The heating element, which bears the brunt of the load, fails first, followed by the electronics and power supply. Replacing the heating element is relatively inexpensive, but the control unit can cost 30% to 50% of the dryer's price.

Among other things, there may have been a malfunction in the electronic unit. Such a problem is most likely related to the software. Professionals at a service center can identify the problem and restore normal operation of the built-in system by reconfiguring it.

If the above methods fail to resolve the issue, you should contact qualified service center specialists for diagnostics and repairs. As you've already learned, following the operating instructions and regular maintenance of your Haier dryer will help avoid most problems. Always follow the instructions when caring for your appliance. This is the only way to ensure its continued performance for years to come.

   

Readers' comments