The dryer does not stop

A lack of knowledge about how dryers work generates many questions among new users. For example, some complain that their dryer won't stop during the drying cycle. In today's article, we'll explore why this behavior might occur and what to do about it.

Why isn't there a complete stop?

When studying dryers, many users constantly compare them to washing machines, as they are so similar in appearance. However, this is a misconception. Owners expect the dryer to operate as vigorously as a washing machine throughout the entire cycle and to emit a distinctive signal at the end, but in reality, this is not the case. About an hour before the end of the cycle, the dryer operates very slowly. The drum rotates slowly and in different directions, giving the impression that the unit has completely stopped.

When the active drying phase is complete, the "Smoothing" process begins, lasting from 15 minutes to an hour, depending on the moisture level of the laundry. During this time, the drum rotates in reverse, ensuring even smoothing of the laundry. The "Complete/Smoothing" indicator on the control panel lights up, indicating that the machine has completed the drying cycle. Depending on the type of laundry, you can either turn off the machine and iron the clothes, or wait until the ironing process is complete and immediately put the clothes in the closet.

Sometimes, the dryer continues to run even though the cycle time has passed. In this case, unplug the dryer and remove all laundry from the drum. There are various reasons for this continuous operation. These include:

• reduction of air flow;
• no heating;
• Incorrect operation of the humidity sensor.

If the dryer's filters have been cleaned and the condensate has been removed, but it still doesn't complete the program and stops, you need to contact a service center!

One of the most common reasons a dryer won't stop is a faulty timer or humidity sensor. When these components aren't working properly, the dryer doesn't recognize whether the laundry is dry and continues to cycle. In this case, it's necessary to check the timer and sensor and replace them if necessary.

Another possible cause could be a clogged ventilation system. If the vents are clogged with dust or other debris, air will not circulate properly, causing the dryer to continue running. In this case, it's crucial to clean the ventilation system to ensure proper operation of your dryer.

Problems that prevent the dryer from completing its program

As you've already understood, if the drying cycle takes longer than usual or the appliance doesn't stop at all, this is the first sign of a malfunction. It's impossible to pinpoint the exact cause without testing, but we'll offer several possible causes.

• Clogged hoses and filters are the real scourge of a dryer. To ensure your equipment operates properly, it is necessary to clean the filter, pipes, and heat exchanger regularly. If you notice that the device suddenly increases the program execution time and then stops turning it off altogether, then the problem lies in the blockage.
• Software error. This usually occurs due to a faulty control board or a short-term system failure. First, try simply unplugging the device and plugging it back in after 10 minutes. If the problem persists, contact a specialist.
• The thermostat sensor has failed. This component regulates the temperature inside the dryer, ensuring it doesn't overheat and that laundry is dried properly. The first sign of a malfunction is that the dryer continues to run even when it should be turned off.
• The locking device is broken. The lock that controls the hatch door may burn out or become disconnected if the wiring becomes disconnected. The main symptom is an endlessly executing program. In this case, the locking device will need to be tested and replaced if necessary.

Problems can be caused by various reasons, and solutions vary depending on the specific situation. To avoid such problems, it's important to perform prompt diagnostics and regularly clean your dryer. This will extend its lifespan and ensure your "home helper" continues to work effectively.

   

Readers' comments