Turning on the Weissgauff washing machine

Turning on the Weissgauff washing machineAfter purchasing a new washing machine, don't rush to load it with laundry and start the wash cycle. There are several recommendations you should follow before using the appliance. What are these nuances?

Let's figure out how to prepare and turn on a Weissgauff washing machine. What detergents should you use? How should you care for your "home helper" to maximize its lifespan?

We start using a new machine

The washing machine has finally arrived from the store. I'm eager to get it running, but there's no rush. Before turning on the Weissgauff washing machine, there are a few things you need to do. First, let it sit at room temperature for a couple of hours.unscrew the transport bolts

The next step is removing the shipping bolts. These retainers hold the tank in place to prevent the heavy container from hitting other internal components of the washing machine during transit. To access the fasteners, the rear panel of the machine must be removed. The holes where the screws were removed are replaced with plugs.

Do not operate the washing machine without the transport bolts removed, as this may completely damage the appliance.

Now you can connect the washing machine to the utilities. The equipment manual contains all the information on putting the washing machine into operation, so be sure to read the user manual. It describes how to connect the machine to the water supply and sewerage system, how to position the drain hose, etc.Weissgauff machine delivery kit

Once you've plugged in the machine, don't rush to start the wash cycle. The next step is a test cycle with no laundry in the drum. This is done for:

  • Rinse the inside of the washing machine, removing factory dust, grease, and stagnant water (which remains in the tank after the machine is checked at the factory);
  • remove the specific chemical smell;
  • Check the automatic washing machine for proper operation (how it fills and empties, whether there are any leaks, whether the drum spins).

A test cycle is performed without laundry but with detergent. You can purchase a special cleaning gel for the first use of the washing machine. It's best to choose a high-temperature wash cycle lasting about two hours.

Sometimes the machine won't start on the first try. Check the door—it may not be fully closed, preventing the locking mechanism from engaging. Sometimes the machine won't start due to a manufacturing defect, but this is rare.

If your new Weissgauff washing machine won't turn on or displays an error, contact a service center immediately for diagnostics.

Activate the normal wash cycle

If the test cycle proceeds normally, you can wash your items in the washing machine. Any high-temperature setting was acceptable for the first time, but as you continue to use the machine, you should be more mindful of the program selection. A description of all washing algorithms is available in the instructions for your specific Weissgauff washing machine model.

The washing mode should be selected based on:

  • fabric type;
  • intensity of laundry contamination;
  • color of things, etc.

The software in modern Weissgauff machines is top-notch. The machines' memory contains both basic and unique algorithms. Additional options are also available, and their range also varies depending on the model. To avoid getting lost in the wide variety of modes and functions, it's important to consult the machine's manual.Be sure to sort your laundry

Once you've sorted your laundry and figured out which program to wash it on, you can start the cycle:

  • Load the items into the drum, distributing them evenly inside;
  • close the hatch door tightly;
  • add detergent to the powder dispenser;
  • plug the washing machine into the power supply, open the water supply valve;
  • press the "On" button;
  • select the desired washing mode, enable the necessary options;
  • Start the wash using the Start/Pause button.

If your Weissgauff washing machine is equipped with a display, it will show the remaining cycle time. When the cycle is complete, your "home assistant" will beep. After 2-3 minutes, the door will unlock and you can remove your laundry from the drum.

About the product used

A properly selected program is only half the success. It is very important to use a quality laundry detergent. What are the recommendations here:

  • give preference to products based on natural ingredients;
  • household chemicals should be developed specifically for automatic machines;Where to pour liquid laundry detergent
  • dose the product correctly using measuring spoons or caps;
  • Do not confuse the compartments of the powder receptacle.

The Weissgauff washing machine's powder dispenser has three compartments. The larger one on the left is for the main wash. The one on the far right is for the pre-wash cycle. The central compartment holds fabric softener; it's where the detergent is removed during the rinse cycle.

If you mix up the compartments, the washing quality will be poor. For example, if you pour fabric softener into the main wash compartment and powder into the rinse compartment, the items will be washed in clean water but rinsed in soapy water.

Timely prevention is important

Many users forget that their washing machine requires maintenance, only remembering it when it breaks down. To ensure trouble-free operation of your Weissgauff washing machine, you need to follow certain rules. Key recommendations:

  • Do not overload the machine, strictly observing the maximum permissible loading weight established by the manufacturer;
  • Wipe the door cuff and the inner surface of the drum of the Weissgauff washing machine after each use;
  • leave the powder container and hatch door slightly open for natural ventilation;leave the washing machine open to dry
  • Do not store any objects on the lid of the machine;
  • Find out the hardness of your tap water and, if necessary, install a water softener filter before the washing machine;
  • Do not interrupt the cycle by pulling the power cord out of the socket - this may damage the control module;
  • Install a voltage stabilizer before the washing machine.

It's important to clean the Weissgauff washing machine's dust filter regularly, approximately every 3-4 months. It's also necessary to descale it every six months using a high-temperature cycle and a special detergent.

   

Readers' comments

Add a comment

We recommend reading

Washing machine error codes