How to turn on a Zanussi washing machine

Obviously, to properly operate a washing machine, it needs to be turned on correctly. Yes, you heard right—simply starting the wash cycle isn't enough; you need to follow a host of recommendations to extend the life of your washing machine and improve its washing results. In this article, we'll explain how to properly turn on a Zanussi washing machine.

Getting ready to turn on the machine

So, if your washer is already plugged in and your laundry is ready to be loaded, don't rush into loading it. First, make sure the following rules are followed.

1. Don't overload the drum, but don't put too little laundry in the machine either. Everything should be done in moderation. The amount of laundry must correspond to the nominal capacity of the machine, otherwise the drum will quickly fail.
2. Wash white and dark fabrics separately. This won't affect the machine's performance, but it will definitely affect your laundry.
3. Don't wash silk and wool together; one will inevitably be damaged (at best). Only wash items of the same fabric type together.

If you have followed everything, and now the laundry is already in the drum, you can proceed further.

Add detergent

Typically, all washing machines have three compartments in the detergent drawer: one for the main wash, one for soaking, and one for conditioning. If you have a Zanussi machine, the drawer will have instructions indicating which compartment is used for what! But just in case, here's the breakdown:

• left compartment – ​​for the main detergent;
• intermediate average – for the preliminary process;
• right - compartment for air conditioning.

Keep in mind that the amount of powder should also be measured. The required amount of the product is usually indicated on the packaging.Don't think that the more powder you use, the better your clothes will be washed: this is a misconception.Dry powder is already difficult to wash out, and if you use too much, it will most likely remain on your clothes and cause skin irritation and allergic symptoms.

We put away laundry correctly

As mentioned above, don't overload the drum and wash dark and colored items separately from light and white fabrics. Also, try to wash items that tend to fade separately from other clothes to prevent them from ruining other clothes.

Important! Try to distribute the laundry evenly across the drum, not in a lump. This will significantly improve the washing, spinning, and rinsing results.

After loading your items, make sure the door is tightly closed, otherwise the door locking system may malfunction. Be careful where you place bulky items; don't pack them too tightly, as this may prevent the drum from handling the load.

Activate the program

To select an operating mode, on some machines you need to turn the wheel and position the arrow next to the desired program. On other models, they are activated by pressing the corresponding buttons:

• washing cotton fabrics;
• woolen products;
• synthetic fabrics;
• everyday washing;
• gentle regime;
• quick wash;
• baby laundry.

As you can see, the program is selected based on the type of fabric, its washing characteristics (intensity, speed), and so on. Almost all available cycles can be adjusted.

Regulating water heating

It's important to keep in mind that some fabrics don't tolerate very hot water. Typically, garment tags indicate the appropriate washing temperature. But if you're unsure, here are some general guidelines:

1. At the maximum temperature (90 degrees for a Zanussi machine), you should wash heavy fabrics such as towels and other bathroom accessories, as well as bed linen. These items require intensive washing.
2. It's common to wash synthetics at a medium temperature of 40 to 60 degrees Celsius. They wash well this way.
3. Low temperatures are typically used for washing lightweight items without tough stains or heavy soiling. If you simply need to refresh an item, choose a temperature of 35-40 degrees Celsius.

Please note: Zanussi washing machines have a temperature range of 35-90 degrees.

Set the drum rotation speed

This indicator determines the spin intensity of the machine. This feature is, of course, very useful. After spinning, you remove items from the drum with minimal water left on them. After spinning, clothes dry easily and weigh much less (which makes it easier for the housewife to hang them up to dry).

However, it's important to keep in mind that the more delicate the fabric, the less intense the spin cycle should be, and the lower the drum speed. If you're washing something very light and delicate, it's best to spin it by hand afterwards.

How to start the washing process?

Yes, everyone knows that you need to press the ON button to turn on the machine and the START button to initiate the wash cycle. However, there are additional points to consider.

Zanussi washing machines feature a delayed start function. This means you can set the washing cycle to begin at any time within 24 hours from the moment you load the laundry. This is very convenient for busy people, who can set a delayed start and forget about washing their clothes.

If you're a heavy sleeper, it's best to set your laundry for the night, as this can save you a lot of money. The difference between nighttime and daytime water rates is quite significant.

When does the machine finish working?

Zanussi machines are equipped with an audible end-of-cycle indicator. After the signal sounds, 30 seconds must pass before the safety system allows you to open the door.

After the laundry has left the machine and is in the dryer, you can clean the drum. A lot of water usually collects under the drum seal, and since the seal is rubber, this environment is ideal for bacteria growth due to the high humidity. After washing, pull the seal back and wipe the rim underneath with a dry cloth.

You can't wipe the inside of the drum with a dry cloth, so leave the door open for a while after washing.Then all the moisture will evaporate quickly, which will not lead to the development of mold.

Helpful tips

Now we'll give you some general recommendations for operating the machine. Please pay special attention to these recommendations and always follow them.

1. On some machines, you don't need to manually set parameters like temperature and intensity; they're already included in the programs.
2. For washing, use only detergents for washing machines, not for hand mechanical washing.
3. There are also gel detergents, which are either placed in capsules in the drum or poured from a container into a dispenser tray. Their advantage over dry detergents is that they rinse out easily and don't leave residue on clothes.
4. The pre-wash mode is a kind of soaking of laundry with problem stains.
5. If your wash cycle suddenly stops, don't panic. This often happens if either the cold water flow is interrupted (washing will automatically resume when the flow resumes) or if laundry has become clumped in the drum, slowing it down. In the latter case, the machine will display an alarm code, and you can open the door to reload the laundry. If everything is correct, the wash cycle will resume.

Follow the rules and try to maintain the condition of your washing machine, then it will serve you longer!

   

Readers' comments