How to remove the detergent drawer from an Ardo washing machine?

How to remove the detergent drawer from an Ardo washing machine It's hard to find a housewife who can't remove the detergent dispenser from her washing machine. There's usually a tab in the center of the dispenser that covers the rinse aid compartment. By pushing on it while simultaneously pulling the dispenser out, the dispenser comes out easily. Most washing machines have this design, but Ardo washing machines have a completely different one.

How to remove a box from Ardo?

Many users prefer to practice rather than read instructions. Therefore, attempts to remove the Ardo tray often involve ripping out the entire mechanism. And those who do pick up the technical documentation are confused by the complex and incomprehensible language.

Imagine you recently purchased an Ardo washing machine, used it for a couple of weeks, and then decided to remove and clean the detergent drawer. The container's structure appears to be intact. How do you remove the drawer correctly?

Pull the compartment towards you until it comes out as far as possible.
Inspect the bottom of the tray from below - on the sides you will see small teeth that prevent the container from being removed.
Lubricate the plastic limiting teeth with any vegetable oil to improve their mobility.
Grasp the container body (not the handle!) and carefully lift it upwards, pulling it towards you, after which it will move a few millimetres.
The previous manipulation helped you pass the two right teeth, but the container was not completely removed.
Now we press on the container from above, it moves downwards with a click.

Please note! The container comes out at a slight angle. Continue pushing and pulling firmly until you can remove the tray completely.

Some Ardo models may have a "PUSH" sign on the softener tray. Simply open the detergent compartment and push the sign. At the same time, pull the drawer outward, and it will easily pop out. Do not remove the drawer while the machine is running, otherwise all the incoming water will spill out. Be careful: even when the equipment is not working, the container may be filled with liquid or powder residue. Therefore, prepare a flat bowl or cloth in advance. Before using the machine, unplug the power cord from the wall outlet. soak the powder tray

You can clean the container physically, using a small soft brush, or chemically, using a complex washing machine cleaning solution. In the latter case, pour the solution into the main wash compartment. Then run the machine at 90 degrees Celsius with a second rinse cycle. The same method can be used to remove the detergent drawer from Indesit machines. The internal structure of the drawers is identical for both brands. Incidentally, both brands are of Italian origin.

How to make it easier to extract an element?

If you've successfully removed and cleaned the drawer, don't rush to put it back. Removing it a second time will make the process much more difficult. What should you do to ensure the Ardo washing machine drawer is easy to remove?

Washing machine repair technicians and knowledgeable consumers recommend using sandpaper or a mini file to carefully file down the teeth. You should remove about one millimeter of plastic. This will make future manipulation much easier and prevent the tray from popping out spontaneously during use. Removing a container from any machine requires a certain amount of skill. Over time, the procedure becomes automatic. The user doesn't even remember the initial difficulties.