How to Use an LG Dryer for the First Time

Does it matter how you first start your LG dryer? Of course, there are some subtleties. Before turning on the dryer, you need to choose a location, understand the software, and so on.

We'll explain how to prepare your dryer before using it for the first time. What operating instructions does the manufacturer provide? How can you use the appliance to maximize its lifespan?

Let's put the new dryer in its place

Before you begin any manipulations, take the instructions for the dryer. First, read the user manual. The manufacturer explains how to properly install the dryer and where the unit should not be placed. The booklet also contains information about the dryer's design, software, and available features.

Now you can choose a location for your new "home helper." Modern LG dryers don't require a plumbing connection. They only require electricity to operate. Therefore, many users choose to place the appliance in the most unexpected places.

The dryer requires a separate outlet designed to handle high power consumption.

Do not operate the dryer using an extension cord. This can cause a short circuit or fire. Power must be supplied through a separate, grounded outlet.

The LG dryer does come with a drain hose. If desired, the machine can be connected to a sewer line. This eliminates the need to empty the condensate collection container. What advice does the manufacturer provide regarding dryer installation?

• It's best to place the dryer next to the washing machine, to the side, or in a stack. This will make it easier to unload washed items and put them in the dryer.
• Place the dryer in a well-ventilated area, making sure the air intakes are not obstructed. Ensure unimpeded air circulation around the appliance.
• Be sure to level the dryer body to avoid any warping. Otherwise, some internal components, such as bearings, will fail faster.
• The floor under the car must be level and solid.
• The dryer's feet must not be removed. There must be an air cushion between the bottom of the dryer and the floor.
• Do not place the dryer on carpets. This will restrict air circulation. The intense heat may cause the material to catch fire.

The dryer's body can be easily adjusted using the feet. Adjust them using a spirit level. Next, press down on each corner of the dryer in turn. The dryer should not wobble. If your "home helper" does wobble, continue adjusting.

Start of operation

Now it's time to start up your new dryer. Before loading laundry, wipe the drum with a damp, clean cloth. There will definitely be dust inside, and sometimes traces of factory grease or other technical fluids will remain on the napkin.

If the cloth is very dirty, it's best to go ahead and wipe the inside of the drum with a soapy sponge. Let the soap sit for 5-10 minutes and then wipe the drum again with a damp cloth. This will ensure your laundry won't get dirty.

Now you can use the dryer for the first time. What recommendations does the manufacturer provide for operating LG dryers?

• Don't load dripping items into the drum. Laundry should be damp and pre-spun in the washing machine. Why? Firstly, this will improve drying efficiency and reduce cycle time. Secondly, it will prevent the user from getting an electric shock.
• Always choose a drying cycle based on the items loaded in the drum. This will prevent items from becoming deformed or overdried.
• Buttons, zippers, rivets – all of these need to be fastened before putting clothes in the dryer.
• Note which items should not be tumble dried. These include leather and suede items, rubber items, furs, felt hats, etc. These materials will be damaged by this treatment, and some may even pose a fire hazard.
• Pay attention to drying time. Over-drying will cause numerous creases in the fabric that will be difficult to remove. Items may also shrink a couple of sizes.
• You should begin unloading the laundry 5-10 minutes after the cycle ends. Opening the drum immediately can result in scalding from the hot air.
• Don't exceed the maximum load capacity. Firstly, some laundry won't dry. Secondly, overloading is harmful to the dryer's structural components.
• Clean the lint filter every two cycles. A clogged container and mesh will not allow air to pass through properly, preventing the dryer from functioning properly.
• Clean the heat exchanger and its filter once a month. Dust accumulates there too.

By following all operating rules, you can significantly extend the maintenance-free service life of your dryer.

To finally get things straight, let's describe exactly how to start your dryer for the first time. Here's the procedure:

• check that all air intakes of the device are open;
• plug the machine into the power supply;
• Load a batch of laundry into the drum, not exceeding the recommended weight limit (these should be items made from approximately the same material);
• Spread the clothes evenly inside the dryer;
• Close the drum door tightly;
• turn on the machine using the power button;
• wait until the indicators on the dashboard light up;
• Use the rotary programmer to select the drying mode;
• connect additional options to the main program (if necessary);
• start the cycle with the Start/Pause button.

Now you need to wait for the cycle to complete. Its duration will depend on the selected program, the moisture level of the load, the type of fabric, and the number of items. The approximate duration of each mode is indicated in the equipment manual.

Impatient users start pacing around the machine after just half an hour, checking to see if it's frozen. In reality, the cycle can last three or four hours. So don't panic; your "home assistant" will alert you when it's finished with a beep.

Drying is finally complete. What other actions should the user take?

• Unplug the dryer.
• Wait 5-10 minutes for the dryer to cool.
• Open the hatch door and take out dry items.
• Drain the water from the condensate container.
• Clean the lint filter.

Afterwards, it's recommended to clean the inside of the drum with a damp cloth. Lint, hair, threads, and fluff may remain. To prevent dirt from accumulating, it's best to remove them immediately.

The door of the washing machine should be left slightly open for ventilation. Avoid overloading your "home helper" with work. A maximum of two cycles in a row is allowed. Allow the dryer to rest for at least half an hour before the third.

Readers' comments